Recent content by Cryptonix

Sorry for my lack of info there Pq6 Pin 1 - 18.78 Pin 4 - 18.78 Pin 5 - 19.25 Pq7 Pin 1 - 18.78 Pin 4 - 18.78 Pin 5 - 2.53

that shouldn't be a problem. ive done a fair ammount of soldering in the past so hopefully it all goes well.

hi there. ok ill get to that now.. i have included both polarities the ones in the brackets were measured with the positive from PJP1 pin 1 = 0 (19.25) pin 2 = 0 (19.25) pin 3 = 5.07 (14.18) pin 4 = 4.95 (9.21) pin 5 = 2.53...

i have taken most of the tests via the input. PJP1. checking voltage on this pu1 chip, is ther a specific order that needs to be checked or do you want it in order like top pin 1 to bottom pin 1 ?

EasyNote TS44HR - B812g32Mnww model no. P5WS0 on the board? P5WE0 A84 and then of course that LA - 6901P 3GMFQ :216

hi there, that coil looks fine. voltage and continuity between both sides... one thing I did pick up on PD2, the side with the black stripe is harbouring around 18.3 volts but on the other side is giving me around 2,3 volts. is PD2 mainly for the battery circuit or could that be an issue...

i have been asked to fix a Packard bell easynote ts44hr laptop, it does not show any indication of power. no lights at all. but if i plug the charger in i can definitely hear it drawing current. i have it disassebled on my dest right now but i see no blown chips. i see 2 red glass tubes on the...