Recent content by OTG123

Have you tried washing it off? Any ring by a suction cup would be on the outside of the set. i can't think of any reason anyone would suction cup the back of the screen. I would try to buff out the marks. Gets some isopropyl alcohol and mix a 50/50 solution with water and a soft shammy cloth...

I think the problem is indeed a CMOS problem. The BIOS (startup chip) has all the instructions and information that your computer needs to start. So when the computer ran out of power and died all the instructions and information was reset to default. To answer your question directly about the...

As it turns out the connector that plugs into the top 2 light strips had a broken tab on it. I must have broken it when I replaced the LEDs . Anyway its all moot now because I accidentally pulled one of the tabs out of the side of the LCD panel when reassembling it. So if anyone needs good...

It appears as if they did not put the LED diffusers (covers that go over the bulb so as the light is dispersed evenly) onto the light strips. I would't be surprised if they charged you for new Light strips and then just replaced the bad LEDs and never put the light diffusers back on. As far as...

I never heard of the font issue, So i am just as curious as you prolly. So by all means check into that. I am new here and would love to hear how that works out. If that is not the problem , To me the problem sounds like a stuck key. I say that because of the " if i backspace it just fill u...

HI all, Names John, Nick name is Oscar the Grouch, OTG for short. i like to fix anything thats broken from mechanical to electronics.

Hi Everyone, I have an LG 55LF6000 TV that I acquired. The problem was the infamous flashing screen. I did a cursory check of the power supply board and it checked out more or less so then I googled the problem and pretty much everything pointed to the backlight strips. Me being the cheap SOB...