2210 batterylow = data loss

[Guest]

Archived from groups: microsoft.public.pocketpc (More info?)

I recently had a total data loss due to a battery low on my ipaq 2210.
I never got any signal about the battery level but when I plugged the 2210
into the main adaptor I was asked to calibrate the screen and to enter my
name....
Fortunately I had a one month old backup, so I was able to recover most of
my data but I do not understand how this is possible. I had in the past a
ipaq 3630 which could work a week before the battery was low.
With my ipaq 2210 I cannot spend more than 2 days without recharging.
Who could help me ?

JJ Golay.

 

[Guest]

Archived from groups: microsoft.public.pocketpc (More info?)

Install the newest ROM update. There was a problem with SD card slot
draining battery when card is inserted - even in power off mode.

--

..: Jakub Kañczugowski
..: www.PDAclub.pl

 

[Guest]

Archived from groups: microsoft.public.pocketpc (More info?)

In article <OrOvdrQNEHA.1160@TK2MSFTNGP11.phx.gbl>, duncan@no-spam-
ever.ceti.pl says...
> Install the newest ROM update. There was a problem with SD card slot
> draining battery when card is inserted - even in power off mode.
>
>
Is that issue only with 2210 or with some other models? (4150?)

 

[Guest]

Archived from groups: microsoft.public.pocketpc (More info?)

Only with 2210/15

--

..: Jakub Kañczugowski
..: www.PDAclub.pl

 

[Guest]

Archived from groups: microsoft.public.pocketpc (More info?)

Hi,
Thank you very much for your tip but I have nothing in the SD slot I only
use the CF slot where I have a IBM Microdrive.
Is the reasoning the same?
Thank you
JJ Golay

"Jakub Kanczugowski" <duncan@no-spam-ever.ceti.pl> a écrit dans le message
de news:OrOvdrQNEHA.1160@TK2MSFTNGP11.phx.gbl...
> Install the newest ROM update. There was a problem with SD card slot
> draining battery when card is inserted - even in power off mode.
>
> --
>
> .: Jakub Kañczugowski
> .: www.PDAclub.pl
>
>

 

[Guest]

Archived from groups: microsoft.public.pocketpc (More info?)

I don't know. But if you experience fast battery discharging you should try
to install new update to your ROM.

--

..: Jakub Kañczugowski
..: www.PDAclub.pl

 

[Guest]

Archived from groups: microsoft.public.pocketpc (More info?)

A microdrive still draws current when not in use, around 20mA air.
(Around 250mA in use).


"Jean-Jacques GOLAY" <jjgolay@iprolink.ch> wrote in message
news:c7j2vr$3fs$1@news.eusc.inter.net...
> Hi,
> Thank you very much for your tip but I have nothing in the SD slot I only
> use the CF slot where I have a IBM Microdrive.
> Is the reasoning the same?
> Thank you
> JJ Golay
>
> "Jakub Kanczugowski" <duncan@no-spam-ever.ceti.pl> a écrit dans le message
> de news:OrOvdrQNEHA.1160@TK2MSFTNGP11.phx.gbl...
> > Install the newest ROM update. There was a problem with SD card slot
> > draining battery when card is inserted - even in power off mode.
> >
> > --
> >
> > .: Jakub Kañczugowski
> > .: www.PDAclub.pl
> >
> >
>
>

 

[Guest]

Archived from groups: microsoft.public.pocketpc (More info?)

"AlanS" <news@remove.abyz.fslife.co.uk> wrote:

>A microdrive still draws current when not in use, around 20mA air.
>(Around 250mA in use).

But not when the device is off. The MD should power down, just as it
does when removed from the slot.
--
__________________________________________________________________________________
Ed Hansberry (Please do *NOT* email me. Post here for the benefit of all)
What is on my Pocket PC? http/www.ehansberry.com/
Microsoft MVP - Mobile Devices www.pocketpc.com
What is an MVP? - http/mvp.support.microsoft.com/

 

[Guest]

Archived from groups: microsoft.public.pocketpc (More info?)

I recomend you adjust the wait time (i'm not sure if this is the name in
english language) in configuration / system / energy and set a large value
if you don't plug the ipaq in a short time. Read the help for more
information about this.

This isn't the answer you expect but maybe can help you in another time.

"Jean-Jacques GOLAY" <jjgolay@iprolink.ch> escribió en el mensaje
news:c7ikru$sag$1@news.eusc.inter.net...
> I recently had a total data loss due to a battery low on my ipaq 2210.
> I never got any signal about the battery level but when I plugged the 2210
> into the main adaptor I was asked to calibrate the screen and to enter my
> name....
> Fortunately I had a one month old backup, so I was able to recover most of
> my data but I do not understand how this is possible. I had in the past a
> ipaq 3630 which could work a week before the battery was low.
> With my ipaq 2210 I cannot spend more than 2 days without recharging.
> Who could help me ?
>
> JJ Golay.
>
>

 

[Guest]

Archived from groups: microsoft.public.pocketpc (More info?)

I have a Wifi CF card and that seems to draw a current even when the 2210 is
off. It would probably flattern the battery in 2-3 days.

Tim

"Ed Hansberry, MS-MVP/Mobile Devices"
<spamfree-silvernino@hotmail.spambegone.com> wrote in message
news:tcoq90pr9l28ghmvh3vpvdkdlijj02d3m3@4ax.com...
> "AlanS" <news@remove.abyz.fslife.co.uk> wrote:
>
> >A microdrive still draws current when not in use, around 20mA air.
> >(Around 250mA in use).
>
> But not when the device is off. The MD should power down, just as it
> does when removed from the slot.
> --
>
____________________________________________________________________________
______
> Ed Hansberry (Please do *NOT* email me. Post here for the benefit of all)
> What is on my Pocket PC? http/www.ehansberry.com/
> Microsoft MVP - Mobile Devices www.pocketpc.com
> What is an MVP? - http/mvp.support.microsoft.com/

 

[Guest]

Archived from groups: microsoft.public.pocketpc (More info?)

Go with the updated ROM 1.1 for the 2200. I could ping my 2200
with a CF ethernet card even after I powered off [that's bad].
Since the 1.1 update I can't [that's good].

- - -

Date: Mon Dec 8 19:32:04 2003
Newsgroups: microsoft.public.pocketpc
Subject: Re: iPaq 2215 w/ CF Wireless Card - eats battery?
References: <eBbCKsevDHA.3224@tk2msftngp13.phx.gbl>
Organization: [40th Floor]
Followup-To:

A 2200 has a small battery, and odd as it sounds, power remains
on for the CF slot during a suspend (my LP-E net card keeps its
connection up, for example). HP does have a big ol' battery
for the 2200, PN FA197A (4.2V @ 3600 mAH, 4x the stock 900mAH).

http/h30143.www3.hp.com/configure2.cfm?oid=312547#m_16

PP [Mon, 8 Dec 2003 18:26:05 -0600]:
> if there is a higher capacity battery available for the>2215's?

--
40th Floor - Software @ http/40th.com/
iPlay : the ultimate audio player for iPAQs
mp3, ogg, mp4, m4a, aac, wav, and then some