Solved! Cannot use numbers or 10 key on my Gateway NE56R31u laptop

Oct 30, 2018
1
0
10
If my caps are locked on the letters come out lowercase. If the caps lock is off the letters come out uppercase. If I type the number 2 to get the @ sign (the numbers over the letters) it will only show the number 2. I can't get my symbols from these numbers and my 10 Key is not working. I can't do nothing with this.
 
Solution
NOTE: If you need to type in a password to even get into Windows to do the following, make sure you attached an external keyboard first, to get past the password. Then disconnect the external keyboard and try the following...

1. Uninstall the keyboard driver.
2. Reboot the computer (without reinstalling the driver).
3. When it restarts, it should reinstall the driver on its own.

If this doesn't work, you may wish to try connecting/reconnecting an external keyboard and see if it works fine. If it does, then it could be the keys themselves that are the issue.

Additionally, if your device uses one, you may want to try updating the Synaptics Driver if the above doesn't help.

You may also want to check the device for malware, viruses...
NOTE: If you need to type in a password to even get into Windows to do the following, make sure you attached an external keyboard first, to get past the password. Then disconnect the external keyboard and try the following...

1. Uninstall the keyboard driver.
2. Reboot the computer (without reinstalling the driver).
3. When it restarts, it should reinstall the driver on its own.

If this doesn't work, you may wish to try connecting/reconnecting an external keyboard and see if it works fine. If it does, then it could be the keys themselves that are the issue.

Additionally, if your device uses one, you may want to try updating the Synaptics Driver if the above doesn't help.

You may also want to check the device for malware, viruses, etc., which can interfere with normal operation.
 
Solution