- Jun 5, 2010
- 15
- 0
- 18,560
this is what I did:
I bought a new Dell XCD35 which is actually a rebranded ZTE Blade Gen 2 (euro version)
it only had 256mb of ram but actually has 512mb ram in hardware.
In order to unlock it I followed this guide ( http
/www.modaco.com/topic/339048-guide-flashing-firmware-to-bladelibra-via-windows/ ) and completed the process successfully. But I got into a boot loop with android green logo jumping from center to left side and back again.
All I had was access to fastboot and some download mode(accessed by vol up and down while power) tried everything possible in this guide( android.modaco.com/topic/343587-guide-de-bricking-a-zte-blade/ ) but none worked!
finally to try a luck I used a tpt with cm7 in it and it started the tpt process but failed while in userdata.img
so I removed the userdata.img to see if the problem is with that and to my surprise the tpt was successful but still in a boot loop like before
any ways to troubleshoot this?
Thanks in advance
I bought a new Dell XCD35 which is actually a rebranded ZTE Blade Gen 2 (euro version)
it only had 256mb of ram but actually has 512mb ram in hardware.
In order to unlock it I followed this guide ( http
/www.modaco.com/topic/339048-guide-flashing-firmware-to-bladelibra-via-windows/ ) and completed the process successfully. But I got into a boot loop with android green logo jumping from center to left side and back again.All I had was access to fastboot and some download mode(accessed by vol up and down while power) tried everything possible in this guide( android.modaco.com/topic/343587-guide-de-bricking-a-zte-blade/ ) but none worked!
finally to try a luck I used a tpt with cm7 in it and it started the tpt process but failed while in userdata.img
so I removed the userdata.img to see if the problem is with that and to my surprise the tpt was successful but still in a boot loop like before
any ways to troubleshoot this?
Thanks in advance
Facebook
Twitter