Ok guys I need some help:
I've been having major issues with my new NP9170 / Clevo p170em with these specs since I got it:
Np9170 - i7 3610qm - GTX 675m - 8gb 1333mhz ram - 7200rpm HDD.
First off:
When I received the thing, I immediately installed all new windows updates, proceeded to install my games (diablo 2 and Star craft 2), and I immediately was greeted with BSOD from Starcraft.
Then:
I updated my graphics driver to the 301.32 beta drivers, huzzah it worked for a few days.
Then:
I took it to work and it froze while playing SC2, then rebooted it, but every time I tried to launch SC2, blue screened with NVLDDMKM.SYS as the cause. I read this is the Nvidia drivers.
Since then:
I've tried 301.34 beta driver, recovering to an earlier snapshot in windows recovery, reinstalling the stock driver (295.62), still getting BSOD when launching SC2.
Then:
I finally got fed up with trying to get this damn thing working after completely uninstalling all video drivers so only the VGA W7 driver is there, tried to reinstall video driver from Sager's website, same results, BSOD launching sc2 referring to NVLDDMKM.SYS.
I ended up re-installing windows last night, and I've got all the drivers re-installed, but I've been getting weird startup freezes since I installed the Hotkey software. I don't have SC2 with me to reinstall since I formatted, but I am pretty sure I can just run 3dMark11 to test the GPU while I'm at work today.
One problem I had: I wasn't able to install the WLAN driver yet. I'm going to go on Sager's forums to see if I can find it. WHen I tried the one on the disc it said I need to enable the device. I made sure it was enabled in device manager. Gonna go look for more drivers.
My last plea:
Can anyone please help me get this thing working properly? At the very least I'd like to know what to do to find out if this is a hardware issue with the video card itself. I ran a windows mem test and it went 1 pass with no fails so I don't think it's RAM.
I've been having major issues with my new NP9170 / Clevo p170em with these specs since I got it:
Np9170 - i7 3610qm - GTX 675m - 8gb 1333mhz ram - 7200rpm HDD.
First off:
When I received the thing, I immediately installed all new windows updates, proceeded to install my games (diablo 2 and Star craft 2), and I immediately was greeted with BSOD from Starcraft.
Then:
I updated my graphics driver to the 301.32 beta drivers, huzzah it worked for a few days.
Then:
I took it to work and it froze while playing SC2, then rebooted it, but every time I tried to launch SC2, blue screened with NVLDDMKM.SYS as the cause. I read this is the Nvidia drivers.
Since then:
I've tried 301.34 beta driver, recovering to an earlier snapshot in windows recovery, reinstalling the stock driver (295.62), still getting BSOD when launching SC2.
Then:
I finally got fed up with trying to get this damn thing working after completely uninstalling all video drivers so only the VGA W7 driver is there, tried to reinstall video driver from Sager's website, same results, BSOD launching sc2 referring to NVLDDMKM.SYS.
I ended up re-installing windows last night, and I've got all the drivers re-installed, but I've been getting weird startup freezes since I installed the Hotkey software. I don't have SC2 with me to reinstall since I formatted, but I am pretty sure I can just run 3dMark11 to test the GPU while I'm at work today.
One problem I had: I wasn't able to install the WLAN driver yet. I'm going to go on Sager's forums to see if I can find it. WHen I tried the one on the disc it said I need to enable the device. I made sure it was enabled in device manager. Gonna go look for more drivers.
My last plea:
Can anyone please help me get this thing working properly? At the very least I'd like to know what to do to find out if this is a hardware issue with the video card itself. I ran a windows mem test and it went 1 pass with no fails so I don't think it's RAM.