G
Guest
Guest
Archived from groups: alt.video.ptv.replaytv (More info?)
Hey Steph & John & all replayers,
Sorry about the delay in response from the previous post.
Anyway, the touble w/my non-modified 4508 started one afternoon when the
unit was in the off mode (ac was plugged in obviously but I didn't have it
connected to a phone line or networked at that moment). It shows the Please
Wait screen. The unit doesn't soft boot & when I unplug it to hard boot,
still the same Please Wait screen.
I also have audio/video sync problems w/this unit. If I record anything over
an hour in duration, the audio is slightly behind the video after the first
hour of playback.
Now, I can easily change drives but I really need a couple of shows off the
existing drive. I've never used rtv extract.
What worried me most is the audio/video sync problem. I don't know if that
is a hard drive issue or if it's a motherboard issue. If the audio/video
sync problem is not correctable w/a new hard drive, I'd rather just send the
unit back to replay for a 5500 series. I have a couple of 5000 series units
so I'll still be able to network w/others.
Any/all suggestions are appreciated.
Thanks!
Hey Steph & John & all replayers,
Sorry about the delay in response from the previous post.
Anyway, the touble w/my non-modified 4508 started one afternoon when the
unit was in the off mode (ac was plugged in obviously but I didn't have it
connected to a phone line or networked at that moment). It shows the Please
Wait screen. The unit doesn't soft boot & when I unplug it to hard boot,
still the same Please Wait screen.
I also have audio/video sync problems w/this unit. If I record anything over
an hour in duration, the audio is slightly behind the video after the first
hour of playback.
Now, I can easily change drives but I really need a couple of shows off the
existing drive. I've never used rtv extract.
What worried me most is the audio/video sync problem. I don't know if that
is a hard drive issue or if it's a motherboard issue. If the audio/video
sync problem is not correctable w/a new hard drive, I'd rather just send the
unit back to replay for a 5500 series. I have a couple of 5000 series units
so I'll still be able to network w/others.
Any/all suggestions are appreciated.
Thanks!