Question Help

May 1, 2019
1
0
10
0
I have a 600 w. 2 channel class d amp. It's rated for 2 ohm or 4 ohm stable. I have to Sony Xplod 12 and I need to know how to wire them to sound good
 
Feb 16, 2019
68
6
95
1
Is the amp bridgeable? According to the spec's I just read, the woofers are 4 ohm. If the amp is bridgeable and if the 600W spec is in bridged mode, wire them in parallel (+ to + and - to -) to present the 2 ohm load to the amp, for the full rated 600W. Keep in mind that loading an amp at it's minimum impedance rating will make it run hotter, so be sure to have adequate cooling. I connect a computer fan via relay to the amp trigger, so the fan turns on when the amp turns on and blows across the heat sinks. I also have an exhaust fan with filtered air intake because my setup is in the spare tire well of my hatchback. Just an option for less-than-optimal cooling.
 
Last edited:

ASK THE COMMUNITY

TRENDING THREADS