Solved! How do I wire an aux cord with4 tiny wires to a speaker with 2 wires

Dec 18, 2018
1
0
10
0
I'm trying I'm trying to make Bluetooth speakers. I spliced auxiliary cord an splice speaker cord there is four tiny wires and 2speaker wires how do you wire the 4 wires into the two wires which ones are which ones are negative it's like red gold green blue an they're tiny
 

Robert Ban

Estimable
Jul 30, 2014
437
0
6,010
109
You need multimeter for that with beeper, there are aux diagrams 4 pole usually are with mic included (google aux 4 pole diagram).

You just check out which wire is which pole.

Going blind is not recommended, you can burn your amp, like i did.
 

Robert Ban

Estimable
Jul 30, 2014
437
0
6,010
109
You need multimeter for that with beeper, there are aux diagrams 4 pole usually are with mic included (google aux 4 pole diagram).

You just check out which wire is which pole.

Going blind is not recommended, you can burn your amp, like i did.
 
What speakers are these?
If these are self powered speakers then the BT receiver connects to the input of the amp which might be the four thin wires not to the wires that go directly to the speakers themselves.
If they are passive speakers you will need an amp with BT receiver to convert them to BT.
 
Thread starter Similar threads Forum Replies Date
S Audio 1
J Audio 6
david.molnaar Audio 0
FirstLast1234 Audio 1
P Audio 2
S Audio 2
JackGarrison Audio 1
kobinath Audio 1
T Audio 0
RikZ Audio 3
S Audio 3
K Audio 1
H Audio 0
SheriB10671 Audio 0
P Audio 1
I Audio 3
R Audio 3
C Audio 2
S Audio 1
E Audio 1

ASK THE COMMUNITY