How To Get two 3.5mm Inputs into one 3.5mm output

[Ohh OriginaLz]

I need to have (x2) 3.5mm inputs and (1x) 3.5mm output cause i need to get something setup.

<---THIS IS THE IMAGE WHAT I NEED

 

[Hendra_Nucleo]

You have to do manually joining 2 x 3,5mm jack and then connecting to the output. This is easy.

 

[Delroy Monjo]

http://www.amazon.com/s/?ie=UTF8&keywords=audio+splitter+jack&tag=googhydr-20&index=aps&hvadid=34138402282&hvpos=1t1&hvexid=&hvnetw=g&hvrand=12037161225287268486&hvpone=&hvptwo=&hvqmt=b&hvdev=c&ref=pd_sl_2os3drbnle_b

 

[Ohh OriginaLz]

http://www.amazon.com/s/?ie=UTF8&keywords=audio+splitter+jack&tag=googhydr-20&index=aps&hvadid=34138402282&hvpos=1t1&hvexid=&hvnetw=g&hvrand=12037161225287268486&hvpone=&hvptwo=&hvqmt=b&hvdev=c&ref=pd_sl_2os3drbnle_b

Is that not the male as input and the 2 females as out ?

 

[Delroy Monjo]

There were 20 pages of splitters on that page. I'm not going to look at every one of them, that's your job. You might even have to get some proper adaptors to fit the adaptor.

 

[alexb870]

This would work if you had a couple male to male 3.5mm cables laying around:


http://www.amazon.com/StarTech-com-MUY1MFFS-Female-Stereo-Splitter/dp/B0081ZBNI4/ref=sr_1_3?ie=UTF8&qid=1409451492&sr=8-3&keywords=3.5+mm+splitter

If you don not have a 3.5 mm cable, buy this 2-pack of these to connect to your PC and xbox:

http://www.amazon.com/Cable-Matters-2-Pack-Plated-Stereo/dp/B00ESM41W4/ref=sr_1_12?ie=UTF8&qid=1409451601&sr=8-12&keywords=3.5+mm+cable

 

[americanaudiophile]

A switch like this:
http://electronicsusa.com/mk1and2.html
is a better solution as with y connectors the sources will feed each other as well as the receiver. If one of them is off it can short or load the other source.
Sometimes just using y connectors will work but not always, You can try it

 

[Ohh OriginaLz]

A switch like this:
http://electronicsusa.com/mk1and2.html
is a better solution as with y connectors the sources will feed each other as well as the receiver. If one of them is off it can short or load the other source.
Sometimes just using y connectors will work but not always, You can try it

Any UK Links ?