Solved! Huawei LYO-L02 wont turn on! please help!

Jan 28, 2019
2
0
10
i have a Huawei LYO-L02 i rooted it in the past and now is no longer working when i turn it on it just stays on huawei screen
 
Solution
Try starting it up in "Safe Mode" and see if it will load. If it does, then you likely have something on it you need to remove. Bad app, virus, malware, etc., to get it to work correctly.

However, if it won't even start up in "Safe Mode", then you will either need to do a "Hard Reset" (which will wipe the device and start it as it was when it was purchased, your stuff gone) or have it looked at by a tech (who may reset it anyway).


To get into "Safe Mode" please do the following.

1. First turn off the phone.

2. Next press and hold "Power" until you see the manufacturers logo on the screen, then release the power button.

3. "Quickly" press "Volume Down" and hold it for few seconds until you see the message "Safe mode: ON" or...
Try starting it up in "Safe Mode" and see if it will load. If it does, then you likely have something on it you need to remove. Bad app, virus, malware, etc., to get it to work correctly.

However, if it won't even start up in "Safe Mode", then you will either need to do a "Hard Reset" (which will wipe the device and start it as it was when it was purchased, your stuff gone) or have it looked at by a tech (who may reset it anyway).


To get into "Safe Mode" please do the following.

1. First turn off the phone.

2. Next press and hold "Power" until you see the manufacturers logo on the screen, then release the power button.

3. "Quickly" press "Volume Down" and hold it for few seconds until you see the message "Safe mode: ON" or something similar.

4. If you wanted disable it, simply repeat the steps above, and you should see "Safe Mode: OFF" rather than on.


NOTE: Doing this will clear 'all' the data on your phone, so it is suggested you not choose this option unless you have to, or aren't worried about losing anything on the device.

Be sure you back up any data you want to keep, to a computer or cloud account, before doing the reset.


To "Hard Reset" the phone...

1. Make sure that the phone is actually powered off.

2. Remove your SD card, if there is one in the device.

3. Press the "Power" and the "Volume Up" buttons, together, until you see the start-up logo on the screen.

4. Once you can see the logo, release the buttons and allow the device to enter the "System Recovery Mode".

5. Next use "Volume Down" button to get to the "wipe data/factory reset" option.

6. When in recovery mode the "Volume Up" and "Volume Down" buttons are how to can navigate and highlight what option you need.

7. Once you have selected the "wipe data/factory reset", press the "Power" button to select that option.

8. On the following screen, repeatedly press the "Volume Down" button until the "Yes - delete all user data" option is what is selected.

9. Then press the "Power" button to hard reset the phone.

10. If you took your SD card out in step 2, when the device is up and running again, reinsert the SD card.
 
Solution