I have a Lenovo Ideapad 510, and my laptop just shows a blank screen and a cursor, I tried the Ctrl+Alt+Delete method and some

Try these...


Option 1 ...

1. First, while the computer is off, connect an external monitor.
2. Next turn on the computer and allow it to fully load.
3. Once loaded, press the "Windows Key" + "P" to open the "Easy Display Switcher".
4. In here select "Computer only".
5. Now shut down the computer and disconnect the external monitor.
5. Disconnect the external monitor
6. And finally restart the computer.


Option 2 ...

Make sure you wait until the computer would be fully loaded before trying this, and not try it right away like you would to say get into BIOS. This needs you to actually be where you would be when Windows Explorer loads.

1. Press "Shift" repeatedly until the "sticky keys" window shows up.

2. Now click the the link there that will lead to the "Ease of Access Center".

3. Next click "Cancel" on the the bottom right corner of the "Set Up Sticky Keys" window.

4. From here you want to click "Control Panel" on the upper left corner (it should be right beside the "Make Your Computer Easier to Use" title.

5. Locate the "Computer Settings" menu and then choose the "Recovery" icon (make sure that your view of this is by either large or small icons for easier access).

6. Now click and open "System Restore".

7. Here you want to click next on the bottom right corner (a few times) until the button "Finish" shows up and then click it. (Just follow everything prompt that the window says which will lead you to recovering your previous system, in a certain time.

8. The computer will now do the work it needs to and then reboot.


If that doesn't work, you can try the following...

You can also try doing the Ctrl+Alt+Delete and see if you can get "Task Manager" to show.


If the "Task Manager" windows shows, then choose "New Task" and then type in EXPLORER. If the desktop shows up then you need to go into "Start", "Programs", then "Accessories" and finally "Command Prompt". (Or you can do a search for CMD.)

Make sure you load the "Command Prompt" with Administrator access. Then when it loads type in....

SFC /SCANNOW

It will do a file check.

To learn more about "SFC" visit this link at Microsoft... https://support.microsoft.com/en-us/kb/929833
 
Try these...


Option 1 ...

1. First, while the computer is off, connect an external monitor.
2. Next turn on the computer and allow it to fully load.
3. Once loaded, press the "Windows Key" + "P" to open the "Easy Display Switcher".
4. In here select "Computer only".
5. Now shut down the computer and disconnect the external monitor.
5. Disconnect the external monitor
6. And finally restart the computer.


Option 2 ...

Make sure you wait until the computer would be fully loaded before trying this, and not try it right away like you would to say get into BIOS. This needs you to actually be where you would be when Windows Explorer loads.

1. Press "Shift" repeatedly until the "sticky keys" window shows up.

2. Now click the the link there that will lead to the "Ease of Access Center".

3. Next click "Cancel" on the the bottom right corner of the "Set Up Sticky Keys" window.

4. From here you want to click "Control Panel" on the upper left corner (it should be right beside the "Make Your Computer Easier to Use" title.

5. Locate the "Computer Settings" menu and then choose the "Recovery" icon (make sure that your view of this is by either large or small icons for easier access).

6. Now click and open "System Restore".

7. Here you want to click next on the bottom right corner (a few times) until the button "Finish" shows up and then click it. (Just follow everything prompt that the window says which will lead you to recovering your previous system, in a certain time.

8. The computer will now do the work it needs to and then reboot.


If that doesn't work, you can try the following...

You can also try doing the Ctrl+Alt+Delete and see if you can get "Task Manager" to show.


If the "Task Manager" windows shows, then choose "New Task" and then type in EXPLORER. If the desktop shows up then you need to go into "Start", "Programs", then "Accessories" and finally "Command Prompt". (Or you can do a search for CMD.)

Make sure you load the "Command Prompt" with Administrator access. Then when it loads type in....

SFC /SCANNOW

It will do a file check.

To learn more about "SFC" visit this link at Microsoft... https://support.microsoft.com/en-us/kb/929833
 
Thread starter Similar threads Forum Replies Date
R Laptop Tech Support 5
SamDDG Laptop Tech Support 1
S Laptop Tech Support 2
Zenalt Laptop Tech Support 0
Nemanja157 Laptop Tech Support 3
D Laptop Tech Support 1
V Laptop Tech Support 5
MasterLewis Laptop Tech Support 1
M Laptop Tech Support 6
w00zyy Laptop Tech Support 5
B Laptop Tech Support 4
J Laptop Tech Support 1
S Laptop Tech Support 1
K Laptop Tech Support 4
M Laptop Tech Support 1
O Laptop Tech Support 4
H Laptop Tech Support 1
D Laptop Tech Support 1
R Laptop Tech Support 1
H Laptop Tech Support 2
Similar threads
Question Laptop won't Power On
Question Lenovo Ideapad L340 Gaming laptop battery backup suddely cut in half overnight
Question My Lenovo IdeaPad 320 Laptop AMD keeps playing Speaker Audio to the Microphone when I use it on external apps.
Question Keyboard Buttons Acting Weird
Question Battery drain
Question Lenovo Ideapad Dead - Sudden shutdown, can't charge or turn on.
Question Lenovo keyboard troubleshoot
Question lenovo ideapad miix 310-10icr screen black
Question Lenovo laptop won't charge after running out of battery
Question Laptop blacks out out of nowhere while using. On a Lenovo Ideapad 700 laptop.
How do I put full brightness for Lenovo Ideapad 32-15ABR
Lenovo 100s ideapad won’t turn on!!!!!
I have a Lenovo Ideapad 520 15.6-inch Laptop (8th Gen Core i5-8250U/8GB/2TB/Windows 10/Integrated Graphics),and i want upgrade
Lenovo Ideapad 330 Battery Drain isuue
Hi, I have a laptop Lenovo Ideapad 100. I used it the day before yesterday but now it's not charging. Can you help? Thanks in
I have a lenovo laptop with ideapad 110 with 4GB ram and the processor is AMD E1, can I change the processor?
I have Lenovo ideapad 110 now my issue is today I want to use my laptop and I press power button to turn on but in start proce
Please help.. i have lenovo ideapad 110 non removable battery, yesterday my laptop was completely fine but when i start it tod
When i turn on my lenovo laptop ideapad 110 , the dispaly stays black while the pc is on and i have do everything but it does
Random drop FPS on every game on laptop. Please help ( lenovo ideapad 510-15ISK)

ASK THE COMMUNITY