I tried everything said above and my laptop shows “acer” and its still black screen

Feb 26, 2018
1
0
10
0
I did everything everyone said but still doesn’t work for me and it turned on shows “acer” and loading button with cursor and that’ all
 
Try these...


Option 1 ...

1. First, while the computer is off, connect an external monitor.
2. Next turn on the computer and allow it to fully load.
3. Once loaded, press the "Windows Key" + "P" to open the "Easy Display Switcher".
4. In here select "Computer only".
5. Now shut down the computer and disconnect the external monitor.
5. Disconnect the external monitor
6. And finally restart the computer.


Option 2 ...

Make sure you wait until the computer would be fully loaded before trying this, and not try it right away like you would to say get into BIOS. This needs you to actually be where you would be when Windows Explorer loads.

1. Press "Shift" repeatedly until the "sticky keys" window shows up.

2. Now click the the link there that will lead to the "Ease of Access Center".

3. Next click "Cancel" on the the bottom right corner of the "Set Up Sticky Keys" window.

4. From here you want to click "Control Panel" on the upper left corner (it should be right beside the "Make Your Computer Easier to Use" title.

5. Locate the "Computer Settings" menu and then choose the "Recovery" icon (make sure that your view of this is by either large or small icons for easier access).

6. Now click and open "System Restore".

7. Here you want to click next on the bottom right corner (a few times) until the button "Finish" shows up and then click it. (Just follow everything prompt that the window says which will lead you to recovering your previous system, in a certain time.

8. The computer will now do the work it needs to and then reboot.


If that doesn't work, you can try the following...

You can also try doing the Ctrl+Alt+Delete and see if you can get "Task Manager" to show.


If the "Task Manager" windows shows, then choose "New Task" and then type in EXPLORER. If the desktop shows up then you need to go into "Start", "Programs", then "Accessories" and finally "Command Prompt". (Or you can do a search for CMD.)

Make sure you load the "Command Prompt" with Administrator access. Then when it loads type in....

SFC /SCANNOW

It will do a file check.

To learn more about "SFC" visit this link at Microsoft... https://support.microsoft.com/en-us/kb/929833
 
Try these...


Option 1 ...

1. First, while the computer is off, connect an external monitor.
2. Next turn on the computer and allow it to fully load.
3. Once loaded, press the "Windows Key" + "P" to open the "Easy Display Switcher".
4. In here select "Computer only".
5. Now shut down the computer and disconnect the external monitor.
5. Disconnect the external monitor
6. And finally restart the computer.


Option 2 ...

Make sure you wait until the computer would be fully loaded before trying this, and not try it right away like you would to say get into BIOS. This needs you to actually be where you would be when Windows Explorer loads.

1. Press "Shift" repeatedly until the "sticky keys" window shows up.

2. Now click the the link there that will lead to the "Ease of Access Center".

3. Next click "Cancel" on the the bottom right corner of the "Set Up Sticky Keys" window.

4. From here you want to click "Control Panel" on the upper left corner (it should be right beside the "Make Your Computer Easier to Use" title.

5. Locate the "Computer Settings" menu and then choose the "Recovery" icon (make sure that your view of this is by either large or small icons for easier access).

6. Now click and open "System Restore".

7. Here you want to click next on the bottom right corner (a few times) until the button "Finish" shows up and then click it. (Just follow everything prompt that the window says which will lead you to recovering your previous system, in a certain time.

8. The computer will now do the work it needs to and then reboot.


If that doesn't work, you can try the following...

You can also try doing the Ctrl+Alt+Delete and see if you can get "Task Manager" to show.


If the "Task Manager" windows shows, then choose "New Task" and then type in EXPLORER. If the desktop shows up then you need to go into "Start", "Programs", then "Accessories" and finally "Command Prompt". (Or you can do a search for CMD.)

Make sure you load the "Command Prompt" with Administrator access. Then when it loads type in....

SFC /SCANNOW

It will do a file check.

To learn more about "SFC" visit this link at Microsoft... https://support.microsoft.com/en-us/kb/929833
 
Thread starter Similar threads Forum Replies Date
T Laptop Tech Support 1
L Laptop Tech Support 1
N Laptop Tech Support 1
F Laptop Tech Support 1
M Laptop Tech Support 1
D Laptop Tech Support 1
S Laptop Tech Support 1
W Laptop Tech Support 1
O Laptop Tech Support 1
F Laptop Tech Support 2
S Laptop Tech Support 2
J Laptop Tech Support 1
H Laptop Tech Support 3
S Laptop Tech Support 2
L Laptop Tech Support 1
H Laptop Tech Support 1
H Laptop Tech Support 2
S Laptop Tech Support 1
S Laptop Tech Support 1
S Laptop Tech Support 1
Similar threads
My Acer laptop screen is broken so I normally use HDMI but it just shows a black screen
Solved! acer aspire sw5012 will not turn on and without charger, no lights, when charger plugged in to laptop,it shows a red light and
Solved! I use acer swift 3 window 10. I tried to turn on the laptop, the screen showed the acer logo but suddenly the it turned black.
I have a windows 10 acer touch screen laptop, nothiing happens after i turn it on and the logo shows up, just a black screen b
Acer aspire laptop customer not showing on screen and can't open icons
my acer aspire v15 nitro won't turn on after i reset it. when i turn it on, it only shows the logo and that's just it.
hy my Acer laptop does not show pointer it only show box with a hand and prohibit sign
My laptop acer aspire 5630 is not turning on it shows that it charges and when you press the on button it does the click sound
Acer laptop cracked screen factory reset won’t show on the screen again
Laptop doesn't show Acer screen nor BIOS
when I start my laptop then show no bootable device in acer e5 575?.
I have an Acer laptop Z1402-394D . It show Aptio setup . Please help me to exit it !
when i plug in my new seagate1 TB hard drive to my acer laptop then it is not showing me the disk in disk manager but is sho
The Screen of my Acer 10 laptop is blank .I can hear it when I power it on but the screen show nothing .
May laptop turns on but after it shows acer it only shows d cursor. . . What should i do?
my acer aspire 5740 laptop stuck on first ascer screen says pressF2 to enter setup. i press F2 it shows entering setup and get
Acer laptop stuck in boot loop + won't show picture
my laptop acer aspire ES 521 not showing crystal eye webcam in windows 10
please help my acer laptop show red light in power indecator while been off
I have an acer aspire laptop. Recently, after turning it off for the night then booting up later, it shows the acer screen but

ASK THE COMMUNITY