Intel e7400 Multiplier Unlock

[digital7]

If you still have the voltage on auto, you should take it off of that and set it manually. It is safe to set the voltage as high as about 1.36, possibly 1.4 if you push it a bit. Keep an eye on temperatures as well. Push it as high as you can while staying under 72C or so full load and 1.36 volts.

the voltage is limited and it's max value is 1,263 so how i am going to set the voltage higher ???

p.s. sorry for my bad english

 

[digital7]

yesterday i broke my record . 3,6 Ghz , 1600 Fsb and the tempreature was stable.
400 (bus clock) x 9(multiplier) = 3,6 Ghz , 1600 fsb

 

[sajib]

i'm using the same processor. just pust the voltage at 1.48750. and 400x10= 4Ghz is possible. i'm trying for 4.5 or more. this system is perfectlly stable.

 

[sajib]

can ny1 help me to oerclock it at 4.5 Ghz

 

[cjl]

1.48 is a bit high though for a 45nm CPU. It'll work fine short term, but as a long term system, it is likely to slowly damage the CPU due to the high voltage.