Laptop graphics display problem

[noctornus]

Hello everyone,
When I start my MSI laptop, this is what shows on screen (pics bellow).
http://i1290.photobucket.com/albums/b523/noctornus/pc1_zpsdyco3hr4.jpg
http://i1290.photobucket.com/albums/b523/noctornus/pc2_zpsnk8phvkt.jpg
What can cause this problem and how to repair it?
Please help.
Thanks everyone.

 

[darkbreeze]

That looks like a hardware failure for sure to me. Either the RAM, CPU, motherboard or possibly the hard drive has failed. Are you getting any beep or led codes when you start the unit up?

Try running memtest and seatools for DOS, as a starting point.

Memtest: http://www.memtest.org/


Seatools for DOS: http://www.seagate.com/support/downloads/item/seatools-dos-master/


When you run Seatools, run the short drive self test and the long generic.

 

[noctornus]

There are no beeps or led codes. It start the system and it is possible to control system but there are too much interference.
I downloaded the tools and prepared them but cannot set them to run, because I can not see whats going on, to much interference on the screen.
I will try to run this tools (will remember steps from other computer).
This is how screen looks like.
http://i1290.photobucket.com/albums/b523/noctornus/pcs1_zps2rit3xyn.jpg
http://i1290.photobucket.com/albums/b523/noctornus/pcs2_zpsxxpxygwa.jpg

Thank you a lot for helping me!!

 

[noctornus]

By the way, I tried to run OS from dvd disk drive and same shit happen, so I guess it cannot be hard drive, right?

 

[noctornus]

I opened laptop, inspected heatsink and change thermal paste on CPU. When I put it together first boot it was same. I turned it off and I tried again after 15 minutes, it worked and not squares were showing. Now it's working normally, and I hope it will stay that way. Hope this will be helpfull for somebody.
Thanks darkbreeze for helping me.

 

[darkbreeze]

There must have been a core temp issue or perhaps some crap had gotten into the cpu socket and was shorting out some of the pins. Glad to hear you got it working.