Solved! my rca voyager pro after factory reset says i have no android or google play

Oct 22, 2018
2
0
10
I have done a factory reset on my rca voyager pro table after reboot welcome screen comes up and says you have no good play or it stopped working what to do
 
Solution
If you did the reset that is to save your personal data, it can give you problems. You may well need to do a full "Hard Reset" to resolve this.

NOTE: Doing this will clear 'all' the data on your tablet, so it is suggested you not choose this option unless you have to, or aren't worried about losing anything on the device.

Be sure you back up any data you want to keep, to a computer or cloud account, before doing the reset.


To "Hard Reset" the tablet...

1. Make sure that the tablet is actually powered off.

2. Remove your SD card, if there is one in the device.

3. Press the "Power" and the "Volume Up" buttons, together, until you see the start-up logo on the screen.

4. Once you can see the logo, release the buttons and allow the...
If you did the reset that is to save your personal data, it can give you problems. You may well need to do a full "Hard Reset" to resolve this.

NOTE: Doing this will clear 'all' the data on your tablet, so it is suggested you not choose this option unless you have to, or aren't worried about losing anything on the device.

Be sure you back up any data you want to keep, to a computer or cloud account, before doing the reset.


To "Hard Reset" the tablet...

1. Make sure that the tablet is actually powered off.

2. Remove your SD card, if there is one in the device.

3. Press the "Power" and the "Volume Up" buttons, together, until you see the start-up logo on the screen.

4. Once you can see the logo, release the buttons and allow the device to enter the "System Recovery Mode".

5. Next use "Volume Down" button to get to the "wipe data/factory reset" option When in recovery mode the "Volume Up" and "Volume Down" buttons are how to can navigate and highlight what option you need.

6. Once you have selected the "wipe data/factory reset", press the "Power" button to select that option.

7. On the following screen, repeatedly press the "Volume Down" button until the "Yes - delete all user data" option is what is selected.

8. Then press the "Power" button to hard reset the tablet.

9. If you took your SD card out in step 2, when the device is up and running again, reinsert the SD card.
 
Solution