Packard bell R an Acer model entg71bm-8j0

Owusu_

Prominent
Mar 26, 2017
1
0
510
My Packard bell an Acer model no. MS2397 ENTG71BM-C8J0 power can't be on the, power is blinking but can't be starting
 
Solution
Try the following and see if it will turn on...

1. First make sure the device has been charged.
2. Unplug your charger cord.
3. Remove the battery.
4. Press and hold the "Power" button for 30 seconds.
5. Now plug back in the power/charger cord.
6. Now put the battery back in.

If this doesn't help, then test the power cord to see if it is good. Either try your cord in another device, or try another devices cord in your laptop.

Should that not be the problem, then check the battery to see if it needs replacing.

Try the following and see if it will turn on...

1. First make sure the device has been charged.
2. Unplug your charger cord.
3. Remove the battery.
4. Press and hold the "Power" button for 30 seconds.
5. Now plug back in the power/charger cord.
6. Now put the battery back in.

If this doesn't help, then test the power cord to see if it is good. Either try your cord in another device, or try another devices cord in your laptop.

Should that not be the problem, then check the battery to see if it needs replacing.

 
Solution