Pc won't connect to the internet

Joel_82

Prominent
Jul 9, 2017
3
0
510
0
I just recently booted up my new pc. Everything looked in order, however, it doesn't connect to my internet. I put in the code and it doesn't connect, what's more, it just forgot it as a network. I can't connect it now.
 
You can try the following and see if it helps. If not, and this is a brand new device, I would then take it back to the store and have them replace it with a working device.

1. Go to "Control Panel".

2. Next go to "Network and Internet" and then "Network and Sharing".

3. Now click on "Manage Wireless Networks".

4. On this screen, remove all wireless connections by "right clicking" on it and select "Remove network" from the drop down menu.

5. After doing this, close the open windows and reboot the computer.

6. Once the computer is fully reloaded, scan for the "Wi-Fi networks".

7. Click on the available network that you want to access and select "connect".

8. It takes a moment, but then you will be asked to give a password for your Wi-Fi connection. Type in the password and click the "connect" button.

It should now be connected.

NOTE: If this doesn't work, you may want to reset your modem/router, and then once it is fully loaded again, repeat the above steps.

If this doesn't work, test seeing if your laptop will connect via Ethernet. If so, then your WiFi card may be going.
 
You can try the following and see if it helps. If not, and this is a brand new device, I would then take it back to the store and have them replace it with a working device.

1. Go to "Control Panel".

2. Next go to "Network and Internet" and then "Network and Sharing".

3. Now click on "Manage Wireless Networks".

4. On this screen, remove all wireless connections by "right clicking" on it and select "Remove network" from the drop down menu.

5. After doing this, close the open windows and reboot the computer.

6. Once the computer is fully reloaded, scan for the "Wi-Fi networks".

7. Click on the available network that you want to access and select "connect".

8. It takes a moment, but then you will be asked to give a password for your Wi-Fi connection. Type in the password and click the "connect" button.

It should now be connected.

NOTE: If this doesn't work, you may want to reset your modem/router, and then once it is fully loaded again, repeat the above steps.

If this doesn't work, test seeing if your laptop will connect via Ethernet. If so, then your WiFi card may be going.
 
Thread starter Similar threads Forum Replies Date
S Laptop Tech Support 2
V Laptop Tech Support 0
B Laptop Tech Support 1
E Laptop Tech Support 2
J Laptop Tech Support 12
B Laptop Tech Support 2
E Laptop Tech Support 11
H Laptop Tech Support 1
Clement124 Laptop Tech Support 4
I Laptop Tech Support 3
S Laptop Tech Support 5
T Laptop Tech Support 1
L Laptop Tech Support 1
K Laptop Tech Support 8
A Laptop Tech Support 1
TripleDigitRide Laptop Tech Support 3
P Laptop Tech Support 1
W Laptop Tech Support 1
D Laptop Tech Support 1
A Laptop Tech Support 5

ASK THE COMMUNITY