Question Replacement twitter for my Av123 x-ls speaker Where can I get one

[easyrdr]

Where can I get a replacement twitter for my AV123 X-ls speaker

 

[americanaudiophile]

If you remove the tweeter from the cabinet you should find some indication on the back of it what make and model it is.
If you can't find any info on the tweeter you can try contacting
https://www.madisoundspeakerstore.com/welcome.php
They might be able to help.

 

[easyrdr]

If you remove the tweeter from the cabinet you should find some indication on the back of it what make and model it is.
If you can't find any info on the tweeter you can try contacting
https://www.madisoundspeakerstore.com/welcome.php
They might be able to help.

Thanks for the help my friend

 

[Sonic Illusions]

If you don't have the manual with complete spec's, here it is:
http://www.prillaman.net/av123/82_av123-xseries-manual_v4pt3_web.pdf

You really need spec's. From the manual's spec's, you now have the crossover frequency of 1750Hz (@12db slope), 8 ohms and a sensitivity of 87db (@ 1W/1M) which you want to match as closely as possible. Those are the spec's you need before calling Madisound. You'd be so lucky to find the driver mfr and part# listed on the back of the driver and actually find a direct replacement! I've gotten lucky, but rarely. The guys at Madisound are the best in the biz and can advise you with the tweeter and any possible crossover parts. You may get lucky with 'plug and play'

The tweeter looks like a soft dome. Here's a close match: https://www.madisoundspeakerstore.c...i-vi-q1r-1-fabric-dome-tweeter-116-mm-flange/
If you can't find one with the same sensitivity, they can tell you how to "pad" the tweeter down. Ask them about 'baffle-step' as well to compensate if needed. I would get 2 and replace the other tweeter as well.

Measure the face-plate diameter and give them a call. Good luck!

 

[easyrdr]

If you don't have the manual with complete spec's, here it is:
http://www.prillaman.net/av123/82_av123-xseries-manual_v4pt3_web.pdf

You really need spec's. From the manual's spec's, you now have the crossover frequency of 1750Hz (@12db slope), 8 ohms and a sensitivity of 87db (@ 1W/1M) which you want to match as closely as possible. Those are the spec's you need before calling Madisound. You'd be so lucky to find the driver mfr and part# listed on the back of the driver and actually find a direct replacement! I've gotten lucky, but rarely. The guys at Madisound are the best in the biz and can advise you with the tweeter and any possible crossover parts. You may get lucky with 'plug and play'

The tweeter looks like a soft dome. Here's a close match: https://www.madisoundspeakerstore.c...i-vi-q1r-1-fabric-dome-tweeter-116-mm-flange/
If you can't find one with the same sensitivity, they can tell you how to "pad" the tweeter down. Ask them about 'baffle-step' as well to compensate if needed. I would get 2 and replace the other tweeter as well.

Measure the face-plate diameter and give them a call. Good luck!

Thanks for all the info you were a big help Thank you

 

[scottskillmanpc]

Where can I get a replacement twitter for my AV123 X-ls speaker

Greetings, I know this is a older post but I am wondering if you found the tweeters you were looking for? I have two Tweeters available which I would part with for the cost of shipping and a small handling fee. Also, you may want to look into upgrading that speaker, as I did. Just search google for X-LS Encore and you will find a link to upgrade. let me know if I can be of assistance.