Hi
I have a Panasonic Viera Plasma TH-42PX600B that had from new. The picture started to go red, so i opened the tv up and used compressed air to clean the dust out and especially the fans. It did the trick .But once in a while the picture will turn red so i tap where the fans are and i hear it spins up again and the picture goes back to normal.
So both fan bearings are gone.
My question is i found replacement fans on ebay. The specs on the old fan matches the new ones and has the same connecter but there is one thing different. On the bottom left it has H01 and the new ones i have ordered have H02.
Spec of old fan NMB-MAT 7 Model 3110RL -04W-S19 12-DC 0.10A H01, new fan the same but it has H02.
So my question is can i use the new fan?
Cheers
Lalasan
I have a Panasonic Viera Plasma TH-42PX600B that had from new. The picture started to go red, so i opened the tv up and used compressed air to clean the dust out and especially the fans. It did the trick .But once in a while the picture will turn red so i tap where the fans are and i hear it spins up again and the picture goes back to normal.
So both fan bearings are gone.
My question is i found replacement fans on ebay. The specs on the old fan matches the new ones and has the same connecter but there is one thing different. On the bottom left it has H01 and the new ones i have ordered have H02.
Spec of old fan NMB-MAT 7 Model 3110RL -04W-S19 12-DC 0.10A H01, new fan the same but it has H02.
So my question is can i use the new fan?
Cheers
Lalasan
Last edited:
Facebook
Twitter