Using behringer xenyx 502 mixer

[probson94]

Behringer xenyx 502 mixer

Can this be used with a mic and MacBook as an input and a Sony speaker as the output?

Thanks

 

[Kenton82]

Hi, yeas it can, providing the Sony speaker is 'active' (it has its own built in amplifier)

 

[probson94]

Hi, yeas it can, providing the Sony speaker is 'active' (it has its own built in amplifier)

Not sure, it's a Sony gtk-xb7. Also if it can be, what cables would be needed?

Thanks

 

[Kenton82]

In that case, then yes, that speaker is active. (it has a built in amp) To connect it up to the mixer, you will need one of these - http://www.thatcable.com/product/2-RCA-Male-to-2-x-6.35mm-Mono-Plug-Cable

Have fun!
K.

 

[probson94]

In that case, then yes, that speaker is active. (it has a built in amp) To connect it up to the mixer, you will need one of these - http://www.thatcable.com/product/2-RCA-Male-to-2-x-6.35mm-Mono-Plug-Cable

Have fun!
K.[/

Sorry to be a pest, haha. But would you be able to tell me what to use to connect my MacBook Pro to the mixer? It's a 2015 model with retina etc. I would be using the mac as an input for music, mic as an input for vocals and obviously the speaker as an output.

Thanks again, Peter

 

[Kenton82]

You are not being a pest what so ever 😉 This is what the forum is for, and we are only to glad to help!
The cable you will need for your MacBook to the mixer is https://www.amazon.co.uk/3-5mm-Stereo-6-35mm-Mixer-Cable-x/dp/B01BYOEVOQ

Good luck and i hope you get it all up and running!
Regards,
K.