Question X1 carbon Gen 9, power had dead at all.

[Orions327]

Check motherboard, close to power socket. I see 2 very small component (1x2mm), flat n thin with 10 tiny spot connect for each. Motherboard writes Q263 Q261 ( or Fs1, Fs 2 maybe), they are too close. They burned both of them.
I don't know exactly what they are, Mosfet, Transistor or Fuse. Because I don't have its board view schematic.
Any help I appreciate!

 

[COLGeek]

I suggest taking a clear picture and then circling what you are talking about (MS Paint is good for doing this).

Upload the image to a site like imgur.com and then post a link to the image(s) here.

 

[Orions327]

Thank @COLGeek!
I founded what it is. It is dual N- Mosfet with super tiny low profile.
Its code is CSD87501.
Problem is, they are too tiny to solder even find out to know why they burned...hic...

 

[COLGeek]

Usually, you just replace the motherboard.

The manufacturer could possibly repair because they have the propers tools and knowledge to do so.

 

[Orions327]

Usually, you just replace the motherboard.

The manufacturer could possibly repair because they have the propers tools and knowledge to do so.

Absolutely they can do that. But, I will try as much as I can to fix it. Hopefully!