Recent content by paulchezter

What is the model of your TV? Is your TCL a smart TV? Your TV needs to be connected on the internet before you can install and stream on Amazon prime app.

The only problem here is the receiver. All devices are working well. Since you've mentioned that it happened after the storm, there is a possibility that there are parts or capacitors that had been damaged. It's best for you to bring this to a service center to further check the issue. Or if...

I think there's no problem with the devices you are using, it just so happened that the specific movie you are playing doesn't have any sound other than the movies you are watching, Just keep on watching digital movies that are working well with your projector.

It could be a T-con problem. Before issue gets worse, contact a local TV technician to help you on the diagnosis or determining the damage part of your TV.

Does the power light lit when you turn it on? If this is not turning on nor responding to any actions, possible there is a damaged part, could be capacitors or board that needs to be repaired or replace. Contact a local TV technician to help you on checking for the possible repair.

Contact Samsung if they can help you with the part as well as assess the issue carefully. It could be a fuse or a power board problem but, it is still best to contact the experts about this. Or, if parts are not available, replace your TV with a new one.

If you just bought the power board and TV did not turn on, best advise I can give you is to seek a help to a TV technician for a possibility that it is not only a power board issue. Or, just replace the TV with a new one.

Make sure that input source on the TV is selected to A/V.

Is the remote for your Toshiba TV working? If it is working, perform a system reset on the TV by doing these steps. Press the menu button on the remote, then open the setup menu. Look for settings, then setup and reset TV then press enter. If the remote buttons are not working too, try to...

Unplug it and try to reset your iPhone by holding down the home and sleep button for 10 to 15 seconds. Wait for iPhone to restart then plug it back in and try to check if it will play to your projector. I hope my suggestion works.

Having no signal means a problem with the cable or the input source. Check the input source on the TV. Make sure the correct source is selected.

On your TV, does it have optical audio out port? If it has, you can use an optical audio cable to check sound using external speakers. If the speakers of the TV is giving fuzzy sound, best to contact a technician from service center to diagnose the issue causing it. Take note that if repair will...

Have you tried connecting the DVD to other TV? If VHS is working, I think there's nothing wrong with the cables, possible for a DVD player problem or, if the TV or DVD has other way to connect like HDMI, try to use HDMI cable.

There can be replaceable parts or possible for the whole board to be replaced. If some capacitors or parts are faulty, there are chances it might work, there are chances that it might not work. Just giving a suggestion especially if this is an old TV, it could be really damaged.

It's best for you to contact a local repairman or technician from service center to do the job. Opening the TV and checking the board is very complicated.