Recent content by Yonose

  1. Yonose

    Laptop fell on the ground, everything works fine but will there be future consequences?

    If you had a HDD you probably want to change that to a newer HDD (SSD if you can). If you had a HDD and it was turned on, its a big chance you got a scratch on the HDD and therefor it will be worse the longer HDD is running. If you had a SSD its is probably fine, it can take more impact...
  2. Yonose

    Macbook '11 is slow? Ram upgrade?

    Isnt the ram soldered?
  3. Yonose

    Logitech 5.1 help

    If you say you all cables are correct i can't really help you much than to double check the layout and update drivers if its required. I would suggest you to follow a step-to-step guide, it might help. Worst case your hardware might be defective, you can test this if you have other 5.1 speakers.
  4. Yonose

    Logitech 5.1 help

    Do you got youre inputs plugged into the correct outputs? check your soundcard or motherboard manual for help.
  5. Yonose

    Headset w/mic produce static/hum/high pitched sounds in different scenarios. I am lost, really need help.

    I would buy a AMP/DAQ from someone or a company that sells it, and ask that you need to try it before you are sure you actually need it. If the AMP/DAQ do work, then you simply keep it, if it dosent then you return it and get your money back.
  6. Yonose

    Headset w/mic produce static/hum/high pitched sounds in different scenarios. I am lost, really need help.

    What AMP/DAQ do you have? It seems like you are already on the right track tho, i do believe the problem is from the circuit on the MoBo, either get a desktop AMP/DAQ or get a AMP/DAQ for PCI that have circuit cover.
  7. Yonose

    Looking for a headphone

    Update: So i have used the DT 770 Pro 80ohm for about a week now, I had the Steelseries siberia v2 before, so thats what im comparison against. The DT 770 had a slow start, it had a weak amount of volume in the beginning but it got better after some "warmup" I also used the Fiio E17 (USB) and...
  8. Yonose

    Looking for a headphone

  9. Yonose

    Looking for a headphone

    So yesterday i used the DT 770 Pro 80ohm with the Aune x1 mk2 24 bit mini daq for about 5-7h I know the headphone need like a x-numbers of hours to "warmup" before the sound quality is where it should be. But the sounds still dident feel right, the sound was clear and all, but it still felt...
  10. Yonose

    Looking for a headphone

  11. Yonose

    Looking for a headphone

    Will it be any problem if i try the DT 770 Pro 80Ohm on my motherboard without the amp/daq, will it cause problems for the headphone?
  12. Yonose

    Looking for a headphone

    Alright, i have ordered the DT770 Pro 80Ohm, gonna then test some amp/dac which my colleague have. I'll update this thread for what i liked for future research.