about laptop ram

[JOY11]

brother please tell me wether Corsair DDR3 4 GB Laptop RAM will fit in hp pavilion g6 2303tx it has i5 and 1 gb 7670 ddr3 radeon graphics 500 gb hard disk and will the ram work properly >>??? i am noob in laptop..

 

[attk mast3r]

Can you provide a link? Without it we can't be sure, but I'm guessing it's not able to fit.

You can find compatible memory here: http/www.crucial.com/systemscanner/ doesn't have to be crucial brand just fit the specifications stated in that report.

 

[JOY11]

heres the link below
http/www.flipkart.com/corsair-ddr3-4-gb-laptop-ram-cmso4gx3m1a1600c11/p/itmdhgydacx8xq22?pid=RAMDHFXFBMKZAHZF&otracker=from-search&srno=t_1&query=Corsair+DDR3+4+GB+Laptop+RAM+&ref=3ab7d9da-de9d-4197-b5dd-542da06c2204

 

[JOY11]

heres the link below
http/www.flipkart.com/corsair-ddr3-4-gb-laptop-ram-cmso4gx3m1a1600c11/p/itmdhgydacx8xq22?pid=RAMDHFXFBMKZAHZF&otracker=from-search&srno=t_1&query=Corsair+DDR3+4+GB+Laptop+RAM+&ref=3ab7d9da-de9d-4197-b5dd-542da06c2204

 

[attk mast3r]

The pin size seems right (although yours may need 240 instead of 204), and your motherboard should support 1600mhz ram. The problem here is the cas latency is 11, cas latency deals with response time, so it will respond much slower than other RAM. You'd be better off going with something different, go to crucial and get the PC3 number*, this has to match for the RAM to work. Also, try finding something with a cas latency at or under 9, the lower the better. (keep within 1333mhz-1600mhz)

* When you download and run the scanner the results will appear in your browser, on the right side under "Memory:" will be a list of compatible PC3 numbers and speeds, for example my laptop can run: DDR3 PC3-10600, DDR3 PC3-12800, DDR3 PC3-14900.

 

[beyondlogic]

brother please tell me wether Corsair DDR3 4 GB Laptop RAM will fit in hp pavilion g6 2303tx it has i5 and 1 gb 7670 ddr3 radeon graphics 500 gb hard disk and will the ram work properly >>??? i am noob in laptop..

since its a laptop 204 pin is what its slot is not 240 thats desktop ram why people get confused over this i dont know.

now that depends on the ram inside your laptop id suggest turning it off and checking

write down

speed 1600mhz
voltage also known as v it will either be 1.35 or 1.5 or duel v as in 1.35v-1.5 which means it works at both
finally cl number if its lower ten 11 it wont work if its 11 it will work.

if you want that ram to work with existing ram it must be the exact same

speed 1600mhz
voltage
and cl number as the current ram
and must be 204 pin

if unsure take out the ram out the laptop and take a picture of the sticker on the ram with this info

how to take out ram and upgrade ram
http/h10025.www1.hp.com/ewfrf/wc/document?docname=c00820047&tmp_task=prodinfoCategory&cc=us&dlc=en&lc=en&product=5344285

t

 

[JOY11]

DDR3 PC3-10600, DDR3 PC3-12800, DDR3 PC3-14900
Memory Type: DDR3 PC3-10600, DDR3 PC3-12800, DDR3 PC3-14900, DDR3 (non-ECC)
Maximum Memory: 8GB
Currently Installed Memory: 4GB
Total Memory Slots: 2
Available Memory Slots: 1
4GB
EMPTY

it showed that ..what now ..i cant fit that crosshair ?

 

[JOY11]

DDR3 PC3-10600, DDR3 PC3-12800, DDR3 PC3-14900
Memory Type: DDR3 PC3-10600, DDR3 PC3-12800, DDR3 PC3-14900, DDR3 (non-ECC)
Maximum Memory: 8GB
Currently Installed Memory: 4GB
Total Memory Slots: 2
Available Memory Slots: 1
4GB
EMPTY

it showed that ..what now ..i cant fit that crosshair ?

 

[JOY11]

oh sry brother i got it out..the pc3-12800

 

[beyondlogic]

oh sry brother i got it out..the pc3-12800

check the V number for voltage has to be 1.5 or 1.35-1.5v ( not just 1.35v)

check cl number as well if all is same as the corsair then it will work

 

[JOY11]

where to find out that ?

 

[beyondlogic]

where to find out that ?

google the numbers and letters on the stick of ram heres a tutorial of how to read ram sticks
http/www.ehow.com/how_7264522_read-sticks-ram-memory.html

 

[JOY11]

brother the ram works perfectly ..thnk you for your timre :>

 

[beyondlogic]

brother the ram works perfectly ..thnk you for your timre :>

no problem