Archived from groups: alt.video.satellite.mpeg-dvb (
More info?)
thats what I did, but I figure there had to be some window to go through.
"observer" <observing@somewhere.earth> wrote in message
news:zFhic.2501$FB1.1633@fe25.usenetserver.com...
> My Coship 3188c locks up most the time on AC3 .I try to scan the sat
around
> the parameters of PBS.
>
> "Pseud O. Nym" <pon@blurry-vision.com> wrote in message
> news:Xns94D4A46BFDDBFblurryvision@24.93.44.119...
> > "sat" <spam@nospam.com> wrote in news:04edndGybIIU6xTdRVn-hQ@look.ca:
> >
> > > On tv6 and tv3 anyone else having that experience?????
> > > I dont get any sound on the rest, but a beautiful picture.
> > > Am I missing something here????
> > >
> > >
> >
> > ++++++++++++++++++
> >
> > The PBS feeds on AMC3 have Dolby AC3 audio so you will need an FTA
> > receiver that has this capability and an AC3 Dolby decoder to get audio
> > from them.
> >
> > There are not very many FTA receivers that can handle AC3 audio. I have
a
> > Fortec Lifetime and there are a few others on the market.
> >
> > You should be able to get audio from "Montana PBS" which is also on AMC3
> > with any FTA receiver.
> >
> > If I accidentally tune across an HDTV channel, it will cause my Fortec
to
> > lock up and require a "power off/on" reset to resume normal operation.
> > There is a PBS HDTV channel also on AMC3. I deleted it from my channel
> > list so I would not accidentally tune across it.
> >
> > Good luck,
> >
> > PON
> >
> >
> >
>
>
Facebook
Twitter