I just installed the latest CCC on my Dell XPS 435mt to try to correct issue I have been having with my display (graphics adapter driver crashing causing blue screen dumps).
Current display info:
Name ATI Radeon HD 4800 Series
PNP Device ID PCI\VEN_1002&DEV_9442&SUBSYS_05021028&REV_00\4&224D4B29&0&0038
Adapter Type ATI display adapter (0x9442), ATI Technologies Inc. compatible
Adapter Description ATI Radeon HD 4800 Series
Adapter RAM 512.00 MB (536,870,912 bytes)
Installed Drivers aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Driver Version Not Available
INF File oem214.inf (ati2mtag_RV7X section)
Color Planes Not Available
Color Table Entries 4294967296
Resolution 1024 x 768 x 75 hertz
Bits/Pixel 32
Memory Address 0xD0000000-0xDFFFFFFF
Memory Address 0xFBEE0000-0xFBEEFFFF
I/O Port 0x0000E000-0x0000EFFF
IRQ Channel IRQ 4294967291
I/O Port 0x000003B0-0x000003BB
I/O Port 0x000003C0-0x000003DF
Memory Address 0xA0000-0xBFFFF
Driver c:\windows\system32\drivers\atikmpag.sys (8.14.1.6214, 302.50 KB (309,760 bytes), 5/24/2011 10:25 PM)
Prior to installing CCC, I have been running 1600dpi display resolutions.
After installing CCC, best resolution I can get is 1080dpi.
Have not been able to get the CCC software to open where I can make better settings.
I have tried several times to install this CCC software to work with the ATI 4850 graphics card, but no luck. I am going to buy a new card if I can't get this problem resolved, and it's not going to be a ATI card.
Any help is appreciated. Thanks in advance.
Current display info:
Name ATI Radeon HD 4800 Series
PNP Device ID PCI\VEN_1002&DEV_9442&SUBSYS_05021028&REV_00\4&224D4B29&0&0038
Adapter Type ATI display adapter (0x9442), ATI Technologies Inc. compatible
Adapter Description ATI Radeon HD 4800 Series
Adapter RAM 512.00 MB (536,870,912 bytes)
Installed Drivers aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Driver Version Not Available
INF File oem214.inf (ati2mtag_RV7X section)
Color Planes Not Available
Color Table Entries 4294967296
Resolution 1024 x 768 x 75 hertz
Bits/Pixel 32
Memory Address 0xD0000000-0xDFFFFFFF
Memory Address 0xFBEE0000-0xFBEEFFFF
I/O Port 0x0000E000-0x0000EFFF
IRQ Channel IRQ 4294967291
I/O Port 0x000003B0-0x000003BB
I/O Port 0x000003C0-0x000003DF
Memory Address 0xA0000-0xBFFFF
Driver c:\windows\system32\drivers\atikmpag.sys (8.14.1.6214, 302.50 KB (309,760 bytes), 5/24/2011 10:25 PM)
Prior to installing CCC, I have been running 1600dpi display resolutions.
After installing CCC, best resolution I can get is 1080dpi.
Have not been able to get the CCC software to open where I can make better settings.
I have tried several times to install this CCC software to work with the ATI 4850 graphics card, but no luck. I am going to buy a new card if I can't get this problem resolved, and it's not going to be a ATI card.
Any help is appreciated. Thanks in advance.