Applications forum

[jacob rodriguez]

the problem that i am having on my computer is my start button that has the date and time moved from the bottom of the screen to the top of the screen can some one help me with my problem?

 

[jacob rodriguez]

yes.

 

[aford10]

Ok, under the Local Area Connection section, highlight and delete all of the connections, besides the one that shows as 'connected.'

 

[jacob rodriguez]

i just did the error messages are gone.

 

[jacob rodriguez]

should i restart my computer now.

 

[jacob rodriguez]

i just restarted my computer before i did in device manager i deleted the connections that are not connected when my computer was finished restarting every thing i deleted cam right back.

 

[aford10]

You deleted the connections, and they came back after restart?? Did they delete successfully before you restarted?

The fax modem can probably be removed from the PC. That would take care of that.

 

[jacob rodriguez]

now the 1394 connection is still connected it says to restart the connection and try to establish full connectivity click repair it says windows could not finish repairing the problem because the following action cannot be completed: TCP/IP is not enabled for this connection cannot proceed for assistance contact the person who manages your network.

 

[jacob rodriguez]

yes i waited untill they deleted.

 

[aford10]

Are you using a wireless or ethernet connection? Your LAN connection shouldn't be using the 1394 connection.

 

[jacob rodriguez]

i use wireless what i have is a crcket 185c portable broadband modem it is a pocket modem.

 

[aford10]

So you're using a USB wireless adapter? That means you should have a Local Area Connection that is showing as connected.

 

[jacob rodriguez]

yes, i have 1394 net adapter connection.

 

[jacob rodriguez]

is there anyway that i can enable the TCP/IP is there any other connection i can use instead of the 1394 net adapter i do not know if you need this information about my computer my computer is windows xp gateway 842 gm media center intel pentium 4 processer 630 supporting ht technology processer speed 3.0 ghz 800 mhz fsb 2 mb l2 cache 200 gb sata hd 7200 rpm with 8 mb cache 1024 mb ddr dual-channel memory double-layer 16x multi format dvd+/- rw 3 firewire 7 usb ports intel graphics media accelerator 900 pci-express slot available intel pro 100 mbps lan digital memory card reader 8-in-1 the digital media manager has usb sd/mmc/sm/ms-pro cf/microdrive.

 

[jacob rodriguez]

the replacement mother board and hard drive that staples used are the same as the ones the manufacturer that is what the computer tech told me as well as the manager.

 

[jacob rodriguez]

i am looking in device manager under IDE ATA/ATAPI controllers intel(R) 82801fb ultra ATA storage controllers 2651 intel 82801fb/fbm ultra ATA storage controllers 266F primary IDE channel primary IDE channel secondary IDE channel under IEEE 1394 bus host controller it says OHCI compliant IEEE 1394 host controller does that have anything to do with what is happening.

 

[jacob rodriguez]

in device manager there is computer,disk drives, display adapters,dvd/cd-rom drives,human interface devices, ide ata/atapi controllers,ieee 1394 bus host controllers,keyboards,mice and other pointing devices,modems,moniters,network adapters,ports(COM&LPT),processors,sound video and game controllers,storage volumes,system devices and universal serial bus controllers.

 

[jacob rodriguez]

is there anybody that can help me with my problem?

 

[aford10]

Right click on the 1394 connection-->properties-->TCP/IP should be listed in there. Make sure the box is checked.

 

[jacob rodriguez]

yes it is checked.