Black Screen after Start Up

frankbenedicts

Prominent
Nov 3, 2017
1
0
510
0
So it goes like this, I turned my laptop off because I had to go somewhere, after a few hours I came back and turned it on after the lenovo start up I end up with a black screen with a cursor. I tried resetting, restoring, safe mode doesnt work. The mouse pointer can move but it disappears and goes back to the middle
Lenovo Ideapad 310-15IKB
Windows 10
Nvidia 920M/Intel Graphics 520

Can someone help pls?
 
Try these...


Option 1 ...

1. First, while the computer is off, connect an external monitor.
2. Next turn on the computer and allow it to fully load.
3. Once loaded, press the "Windows Key" + "P" to open the "Easy Display Switcher".
4. In here select "Computer only".
5. Now shut down the computer and disconnect the external monitor.
5. Disconnect the external monitor
6. And finally restart the computer.


Option 2 ...

Make sure you wait until the computer would be fully loaded before trying this, and not try it right away like you would to say get into BIOS. This needs you to actually be where you would be when Windows Explorer loads.

1. Press "Shift" repeatedly until the "sticky keys" window shows up.

2. Now click the the link there that will lead to the "Ease of Access Center".

3. Next click "Cancel" on the the bottom right corner of the "Set Up Sticky Keys" window.

4. From here you want to click "Control Panel" on the upper left corner (it should be right beside the "Make Your Computer Easier to Use" title.

5. Locate the "Computer Settings" menu and then choose the "Recovery" icon (make sure that your view of this is by either large or small icons for easier access).

6. Now click and open "System Restore".

7. Here you want to click next on the bottom right corner (a few times) until the button "Finish" shows up and then click it. (Just follow everything prompt that the window says which will lead you to recovering your previous system, in a certain time.

8. The computer will now do the work it needs to and then reboot.


If that doesn't work, you can try the following...

You can also try doing the Ctrl+Alt+Delete and see if you can get "Task Manager" to show.


If the "Task Manager" windows shows, then choose "New Task" and then type in EXPLORER. If the desktop shows up then you need to go into "Start", "Programs", then "Accessories" and finally "Command Prompt". (Or you can do a search for CMD.)

Make sure you load the "Command Prompt" with Administrator access. Then when it loads type in....

SFC /SCANNOW

It will do a file check.

To learn more about "SFC" visit this link at Microsoft... https://support.microsoft.com/en-us/kb/929833
 
Try these...


Option 1 ...

1. First, while the computer is off, connect an external monitor.
2. Next turn on the computer and allow it to fully load.
3. Once loaded, press the "Windows Key" + "P" to open the "Easy Display Switcher".
4. In here select "Computer only".
5. Now shut down the computer and disconnect the external monitor.
5. Disconnect the external monitor
6. And finally restart the computer.


Option 2 ...

Make sure you wait until the computer would be fully loaded before trying this, and not try it right away like you would to say get into BIOS. This needs you to actually be where you would be when Windows Explorer loads.

1. Press "Shift" repeatedly until the "sticky keys" window shows up.

2. Now click the the link there that will lead to the "Ease of Access Center".

3. Next click "Cancel" on the the bottom right corner of the "Set Up Sticky Keys" window.

4. From here you want to click "Control Panel" on the upper left corner (it should be right beside the "Make Your Computer Easier to Use" title.

5. Locate the "Computer Settings" menu and then choose the "Recovery" icon (make sure that your view of this is by either large or small icons for easier access).

6. Now click and open "System Restore".

7. Here you want to click next on the bottom right corner (a few times) until the button "Finish" shows up and then click it. (Just follow everything prompt that the window says which will lead you to recovering your previous system, in a certain time.

8. The computer will now do the work it needs to and then reboot.


If that doesn't work, you can try the following...

You can also try doing the Ctrl+Alt+Delete and see if you can get "Task Manager" to show.


If the "Task Manager" windows shows, then choose "New Task" and then type in EXPLORER. If the desktop shows up then you need to go into "Start", "Programs", then "Accessories" and finally "Command Prompt". (Or you can do a search for CMD.)

Make sure you load the "Command Prompt" with Administrator access. Then when it loads type in....

SFC /SCANNOW

It will do a file check.

To learn more about "SFC" visit this link at Microsoft... https://support.microsoft.com/en-us/kb/929833
 
Thread starter Similar threads Forum Replies Date
Thaboss6 Laptop Tech Support 1
C Laptop Tech Support 1
G Laptop Tech Support 0
S Laptop Tech Support 1
D Laptop Tech Support 10
S Laptop Tech Support 1
W Laptop Tech Support 3
O Laptop Tech Support 5
J Laptop Tech Support 2
F Laptop Tech Support 2
C Laptop Tech Support 4
O Laptop Tech Support 2
0 Laptop Tech Support 1
A Laptop Tech Support 1
Y Laptop Tech Support 2
C Laptop Tech Support 1
S Laptop Tech Support 1
B Laptop Tech Support 2
V Laptop Tech Support 1
D Laptop Tech Support 1
Similar threads
Question Sony VAIO: Black screen on start up and then quickly turns off
Question Windows 10 not starting up shows black screen on my connex laptop slim book 2. Only power light is on
Question Laptop starting up and logging in, but all the while with a black screen
Question Asus Starting automatic repair black screen
Solved! My lenovo y520 15ikbn shows black screen when i start my laptop
Solved! Laptop starts but blank screen and half black and grey screen
My laptop wont start just keeps going from a black screen to the hp screen I've tried holding f8 down but it's not working
asus laptop with black screen starts itself when plug in the power cable
Black Screen on Start Up [AW17 R5/1070/8750H] [W10 Home]
my laptop fell of the bed and i cant start it,alwaya black screen
Laptop starts with black screen, fan stops after 5 seconds
My hp.15 isnt starting and tger is no cApslock blink only power button is on and only black screen
Hello, my laptop is Dell with a system type 64 bits. My screen appears black when i press the start button. What shall i do? I
My labtop will boot up i can hear it running but the screen is black i've tried control +alt+del even the start up button f2 a
nearly new asus x540l starts up to asus incredible then goes to black screen then won't do anything after that
My laptop always starts witht he lenova logo and then ends no matter what i do, with a black screen.
Acer e1 552 ,starts up but screen stays black?? Running Windows 10..any ideas?
My laptop hp pavilion 3200 series, powers up progresses no further than black screen then screen starts flashing. Power lights
I turn on my Lenovo laptop and it looks like it going to start but then the screen just stays black what do I do
What do you do when your computer gos the the starting screen then black and back to the starting screen then black over again

ASK THE COMMUNITY