Black Screen Issues please help me!

[sallybeedle_411]

Omg someone please help me! I have a hp stream 11 and I tried to reset it but it failed and when i logged back onto my computer, after entering my password, it said "preparing windows" and after comes a black screen with a moving cursor.

 

[marksavio]

can you force it to shutdown first? press the power button for like 10secs. wait for it to become completely silent. press the power button again to boot up. during boot. try spamming F11. until the recovery mode for your HP laptop pops up. just follow the onscreen instructions there.

 

[sallybeedle_411]

I've actually tried that many times but nothing happened just the same old black screen

 

[marksavio]

you can try removing your battery and your adapter. hold the power button for 60secs. put them back and try to boot.

did you do a windows update recently? did you update a graphics driver?

 

[webworkings]

Try these...


Option 1 ...

1. First, while the computer is off, connect an external monitor.
2. Next turn on the computer and allow it to fully load.
3. Once loaded, press the "Windows Key" + "P" to open the "Easy Display Switcher".
4. In here select "Computer only".
5. Now shut down the computer and disconnect the external monitor.
5. Disconnect the external monitor
6. And finally restart the computer.


Option 2 ...

Make sure you wait until the computer would be fully loaded before trying this, and not try it right away like you would to say get into BIOS. This needs you to actually be where you would be when Windows Explorer loads.

1. Press "Shift" repeatedly until the "sticky keys" window shows up.

2. Now click the the link there that will lead to the "Ease of Access Center".

3. Next click "Cancel" on the the bottom right corner of the "Set Up Sticky Keys" window.

4. From here you want to click "Control Panel" on the upper left corner (it should be right beside the "Make Your Computer Easier to Use" title.

5. Locate the "Computer Settings" menu and then choose the "Recovery" icon (make sure that your view of this is by either large or small icons for easier access).

6. Now click and open "System Restore".

7. Here you want to click next on the bottom right corner (a few times) until the button "Finish" shows up and then click it. (Just follow everything prompt that the window says which will lead you to recovering your previous system, in a certain time.

8. The computer will now do the work it needs to and then reboot.


If that doesn't work, you can try the following...

You can also try doing the Ctrl+Alt+Delete and see if you can get "Task Manager" to show.


If the "Task Manager" windows shows, then choose "New Task" and then type in EXPLORER. If the desktop shows up then you need to go into "Start", "Programs", then "Accessories" and finally "Command Prompt". (Or you can do a search for CMD.)

Make sure you load the "Command Prompt" with Administrator access. Then when it loads type in....

SFC /SCANNOW

It will do a file check.

To learn more about "SFC" visit this link at Microsoft... https/support.microsoft.com/en-us/kb/929833

 

[sallybeedle_411]

That also didn't work, my system won't recover and I tried recovering it with a restore point but it keeps failing