Connect JBL LSR305 to Audioengine s8

[mohitjain1112]

Guys recently my audioengine a5 was damaged and i have purchased JBL lsr305 for its replacement their sound is excellent but bass is low

Is their any way to connect lsr305 to audioengine s8

 

[americanaudiophile]

If your source has a sub out the best way us to connect the s8 to it and the JBLs to the stereo output.
If it doesn't have a sub out then you can connect the stereo output to the S8 and use the line output of it to connect the JBLs.

 

[mohitjain1112]

If your source has a sub out the best way us to connect the s8 to it and the JBLs to the stereo output.
If it doesn't have a sub out then you can connect the stereo output to the S8 and use the line output of it to connect the JBLs.

can u please elaborate i am a noob in the field of audio connection i like to make the 2.1 arrangement with the help of jbl lsr 305 and audioengine s8 subwoofer and drive it via laptop

attaching images for its connection type

 

[americanaudiophile]

Headphone output of laptop to audio input 1 of the Audioengine S8. You will need an cable with 3.5mm stereo mini plug at the laptop end and 2 RCA plugs at the sub end.
Line output of Audioengine s8 to input of each JBL speaker. You will need two cables each with an RCA at the sub end and an male XLR at the speaker end.

 

[mohitjain1112]

Headphone output of laptop to audio input 1 of the Audioengine S8. You will need an cable with 3.5mm stereo mini plug at the laptop end and 2 RCA plugs at the sub end.
Line output of Audioengine s8 to input of each JBL speaker. You will need two cables each with an RCA at the sub end and an male XLR at the speaker end.

Thank you very much sir for help