Connecting active speakers with active sub

Dec 15, 2018
2
0
10
0
Hi

I have a pair of presonus Eris 4.5 speakers that I want to pair with a swissonic 10 sub.

((https://www.bax-shop.be/nl/studio-monitor/presonus-eris-e4-5-actieve-studiomonitor-set-van-2?gclid=Cj0KCQiA6dLgBRDoARIsAJgoM4uqjqj_cmYvEVR08vKNMHvxFEx0OqSFAr_Q8Kr5rrNdG_VOeMXLNLUaAjfkEALw_wcB)
(https://m.thomann.de/be/swissonic_sub10.htm)

I don't know that much of these things and I want to ask how I should connect them. ( the input is my pc ) Can I just go from my pc with a 3.5 mm to 2 trs cables in the input of the sub and from the output 2 trs cables to my speakers?
And would i be able to control thé volume?

Kind regards
Lander
 
If your PC gives you discrete channel outputs, L+R, SUB OUT, then just hook them up directly that way:

PC L+R --> UNBALANCED Presonus.
PC Sub Out ---> swissonic.

If sub has stereo input instead of mono, u may use a Y-cable here.

U PC should be able to control volume. Configure Audio Control Panel for 2.1.
 
If your PC gives you discrete channel outputs, L+R, SUB OUT, then just hook them up directly that way:

PC L+R --> UNBALANCED Presonus.
PC Sub Out ---> swissonic.

If sub has stereo input instead of mono, u may use a Y-cable here.

U PC should be able to control volume. Configure Audio Control Panel for 2.1.
 
Thread starter Similar threads Forum Replies Date
J Audio 1
N Audio 1
K Audio 4
S Audio 1
N Audio 4
T Audio 7
D Audio 1
K Audio 1
T Audio 9
N Audio 2
S Audio 8
M Audio 4
3Bass Audio 1
Z Audio 1
J Audio 2
D Audio 3
P Audio 2
Z Audio 4
D Audio 2
J Audio 1

ASK THE COMMUNITY