Disecq inquiry

[Guest]

Archived from groups: alt.video.satellite.mpeg-dvb (More info?)

Is it possible to use a Disecq switch AND a Disecq
dish actuator on the same line? My 22KHz/0KHz switch
isn't working, and I was thinking about replacing it
with a Disecq switch.

Setup is- MPEG-2 receiver slaved to a BUD dish but
also having it's own dedicated Ku-band dish which
has a Disecq dish actuator.

This Disecq stuff is all new to me- always learning!

Thanks, -Web Williams in Myrtle Beach, SC

 

[Guest]

Archived from groups: alt.video.satellite.mpeg-dvb (More info?)

Your receiver will need to support the Disecq actuator. Not all of them do.




"Not Given" <Nobody@NoSpamAllowed.com> wrote in message
news:MPG.1cdff1216273d617989957@news.usenetserver.com...
| Is it possible to use a Disecq switch AND a Disecq
| dish actuator on the same line? My 22KHz/0KHz switch
| isn't working, and I was thinking about replacing it
| with a Disecq switch.
|
| Setup is- MPEG-2 receiver slaved to a BUD dish but
| also having it's own dedicated Ku-band dish which
| has a Disecq dish actuator.
|
| This Disecq stuff is all new to me- always learning!
|
| Thanks, -Web Williams in Myrtle Beach, SC
|

 

[Guest]

Archived from groups: alt.video.satellite.mpeg-dvb (More info?)

Not Given wrote:
> Is it possible to use a Disecq switch AND a Disecq
> dish actuator on the same line? My 22KHz/0KHz switch
> isn't working, and I was thinking about replacing it
> with a Disecq switch.
>
> Setup is- MPEG-2 receiver slaved to a BUD dish but
> also having it's own dedicated Ku-band dish which
> has a Disecq dish actuator.
>
> This Disecq stuff is all new to me- always learning!
>
> Thanks, -Web Williams in Myrtle Beach, SC
>

I don't know the answer to your question, but you might
also consider a 12V switch as a possible solution.

If you can find a Dish SW-AJ, that's a 12V switch.

 

[Guest]

Archived from groups: alt.video.satellite.mpeg-dvb (More info?)

Yes it is possible. Make sure you install the DiSEqC switch between
the LNBF and HH Motor.

See BUD slave kit here:
http/www.sadoun.com/Sat/Products/Accessories/Dishes/Bud-slave.htm


Not Given wrote:
> Is it possible to use a Disecq switch AND a Disecq
> dish actuator on the same line? My 22KHz/0KHz switch
> isn't working, and I was thinking about replacing it
> with a Disecq switch.
>
> Setup is- MPEG-2 receiver slaved to a BUD dish but
> also having it's own dedicated Ku-band dish which
> has a Disecq dish actuator.
>
> This Disecq stuff is all new to me- always learning!
>
> Thanks, -Web Williams in Myrtle Beach, SC