Help me please

[saurabh070271]

How can I connect 2 pairs of 8 ohms and 2 pairs of 6 ohms and a 8 ohms center speaker with denon s510 bt

 

[alexoiu]

What do you mean?

 

[boosted1g]

So you want to connect 9 speakers to your 5 speaker receiver?

The simple answer is that you dont.
The complicated answer is that you need at least one if not two additional amplifiers that can handle 6 ohm and 8 ohm load AND has line level inputs.

 

[saurabh070271]

So you want to connect 9 speakers to your 5 speaker receiver?

The simple answer is that you dont.
The complicated answer is that you need at least one if not two additional amplifiers that can handle 6 ohm and 8 ohm load AND has line level inputs.

 

[saurabh070271]

Can I use another avr denon 2802 with my new one denon s510 bt to reach somewhere

 

[saurabh070271]

Theater Solutions TS4D Four Zone Dual Source Selector https/www.amazon.com/dp/B002C80Y5O/ref=cm_sw_r_cp_api_PaMzzbKEC8YTD

 

[boosted1g]

Theater Solutions TS4D Four Zone Dual Source Selector https/www.amazon.com/dp/B002C80Y5O/ref=cm_sw_r_cp_api_PaMzzbKEC8YTD

A) you stated you want to run some 6 ohm speakers
B) that unit does nothing to amplfy the signal to the repeat it. Trying to run 4 speakers off of the wattage output of that Denon will be a complete fail

 

[boosted1g]

Can I use another avr denon 2802 with my new one denon s510 bt to reach somewhere

Possibly with line level converters.

Can you tell me what the overall end goal is. I know you want to use those speakers but in what sort of a configuration.

 

[boosted1g]

The second denon is rated for 8ohm but if you dont drive the 6 ohm speakers too hard/loud then you should be ok. I would make sure the receiver never gets too hot though.