Help my asus computer is stuck on aptio setup utility

Solution
Try the following and see if it resolves the problem.

1. In the Aptio Setup Utility, select the "boot" menu and then select "Launch CSM" and change it to "enable".

2. Next select the "Security" menu and then select "secure Boot Control" and change to "disable".

3. Now select "Save & Exit" and press "yes".

4. Once you have done this, hold down the "power" button until the laptop turns off completely.

5. Now you want to power it back on and continually press the "F9" button for about ten seconds or until you are taken to the "Windows Recovery Menu".

6. In here select "Advanced Start Up" and then, once the recovery menu appears, select "Advance Options".

7. Choose "System Restore" and select a date prior to when the problem started...
Try the following and see if it resolves the problem.

1. In the Aptio Setup Utility, select the "boot" menu and then select "Launch CSM" and change it to "enable".

2. Next select the "Security" menu and then select "secure Boot Control" and change to "disable".

3. Now select "Save & Exit" and press "yes".

4. Once you have done this, hold down the "power" button until the laptop turns off completely.

5. Now you want to power it back on and continually press the "F9" button for about ten seconds or until you are taken to the "Windows Recovery Menu".

6. In here select "Advanced Start Up" and then, once the recovery menu appears, select "Advance Options".

7. Choose "System Restore" and select a date prior to when the problem started.

The computer should now go through the restore process and then start normally for you.
 
Solution

6789

Prominent
Nov 13, 2017
1
0
510
hi, please help,
l tried to follow the steps you outlined with my Asus C553 model and it all worked fine until l got to stage 4 where l had to switch off laptop, suddenly, the screen turned black and tells me to reboot or to use a rebooting device which l do not have. What can l do?
 
Oct 3, 2018
1
0
10





This is happening to me too??