Hitachi AXS014BTU Soundbar 30W will not switch on

Solution
New or used (age)?

Are all batteries good? Unit and Remote?

Do you have the User Guide/Manual?

If not, here:

https://estadoc.hitachi.eu/docpublicSearch.htm?materialNum=AXS014BTU#

Check the troubleshooting section. Did not see any references to a possible fuse - you may want to check deeper into that if nothing else works.

New or used (age)?

Are all batteries good? Unit and Remote?

Do you have the User Guide/Manual?

If not, here:

https://estadoc.hitachi.eu/docpublicSearch.htm?materialNum=AXS014BTU#

Check the troubleshooting section. Did not see any references to a possible fuse - you may want to check deeper into that if nothing else works.

 
Solution

honda123

Commendable
Jun 9, 2016
2
0
1,510


 

newtomek

Estimable
Dec 18, 2014
2
0
4,510


How do you disassemble it?
 

newtomek

Estimable
Dec 18, 2014
2
0
4,510


How can I disassemble it?
 
@newtomek

If you are not sure then disassembly is probably something you should get help with; here is why:

1) Doing so can be dangerous and all power cords must be disconnected.
2) Disassembly will void any warranties
3) Many products are not designed to be opened or fixed by the consumer. Very likely something will break.
4) Special tools may be needed. Either to fit the existing screw heads (often hidden under lables or backing) or to pry apart hidden snaps.
5) Replacement parts may not be available. Possibly if a fuse is/was involved. Still could be the switch or some other internal component.

In summary, unless you are really not concerned about the consequences of dissassembly, you can poke and pry away. Otherwise find someone mechanically inclined or otherwise has some experience with electronic repairs - especially speakers.

Try googling "how to take apart a soundbar". There are a variety of related postings so take a look and decide. Just be aware that although many soundbars are similar there could be just enough difference to make your disassembly difficult.

Again be absolutely sure that there are no power or other cable connections before you start.