How do i see my security camera to my tv using antenia cable

1Mboyd

Prominent
Feb 24, 2017
1
0
510
I've. Got a security camera that plugs into the antenna port of my TV how can I view the camera
 
Solution
First locate the remote control of your TV and look for the input/VCR button. If wireless camera receiver is plugged into input 1 press the input/VCR button once. Press it twice if it is plugged into input 2 and so on. Please refer the TV set user's manual too for further instructions on the input selection. Take expert advice if needed from professional security services like calgary alarm (http://www.calgaryalarm.com/residential-alarm/). On some TV sets, the input can be found by first channel to channel 2, then down a channel once or twice to get to the correct input in which the wireless camera system is plugged to.

carol palmer

Commendable
Aug 25, 2016
5
0
1,520
First locate the remote control of your TV and look for the input/VCR button. If wireless camera receiver is plugged into input 1 press the input/VCR button once. Press it twice if it is plugged into input 2 and so on. Please refer the TV set user's manual too for further instructions on the input selection. Take expert advice if needed from professional security services like calgary alarm (http://www.calgaryalarm.com/residential-alarm/). On some TV sets, the input can be found by first channel to channel 2, then down a channel once or twice to get to the correct input in which the wireless camera system is plugged to.
 
Solution