How to Solve Problems With Aptio Setup Utility

[taj89]

When I switched on my laptop it shows Aptio setup utility. How do I solve this?

 

[raybot1]

I have an Asus Notebook X501A and it has just happened to me; I am running Windows 8.1 and I have done nothing at all that may have caused this.

Here's what I did that was succesful:

1/ Select the Boot menu in the Aptio setup utility, select 'Launch CSM' and change to enable
2/ Select the Security menu n the Aptio setup utility, select 'secure Boot Control' and change to disable
3/ Select Save & Exit and press 'yes'
4/ Hold down the power button until the unit switches power off completely
5/ Switch back on and continually press the F9 button for about ten seconds; this should now allow the unit to boot up into the Windows Recovery menu
6/ Select 'Advanced Start Up' and wait until the recovery menu appears
7/ Select ' Advanced Options'
8/ Select 'System Restore' and select a date prior to when the problem occured

System Restore worked perfectly for me; good luck

 

[raybot1]

Thank you! I was searching the Web and trying everything until I found your answer. I have a Asus X555 and it crashed. I have a 1TB hard drive partitioned into 2 500 GB drives. Once it crahed all I got was the looping "repair" screen. I tried CMD prompts and nothing worked, I was ready to wipe the drives clean. I have Windows 8 so I stopped at your line #6. I tapped F9 until I got the startup screen, shut it down, inserted my TodoeaseUS Recovery disk and portable hard drive and its loadind now. I stress the importance of making Windows recovery disks as well as third party disks with a portable hard drive you back up regularly. Windows will get you back to the start and your portable hard drive will restore your last save. Thanks.