hi guys,
I cleaned installed windows 7 on my hp dv6-6137tx after a hard drive failure and can't get the switchable graphics to work properly. I can't do recovery because the hard drive with the recovery partition is bad and I don't have any recovery disks. All drivers would install fine except the AMD high definition graphics driver from hp. After rebooting windows would freeze on the loading screen and the only solution is to boot into safe mode and uninstall the driver.
After much searching the web and trying various solutions (since friday) I've ran out of ideas. Now I know that a lot of people have had this issue but i can't get it resolved. Right now I've managed to install the intel hd graphics using driverpack solution software but i get a code 43 with the HD 6770m.
I also tried to update the HD6770 with microst update but a get a blank screen with a _ flashing at the top left corner during installation and have to hard reset but then windows would freeze on loading screen.
If you have any ideas guys I would really appreciate the help. Now my only solution would maybe be upgrading to windows 10 and hope that it works with that OS.
Cheers
I cleaned installed windows 7 on my hp dv6-6137tx after a hard drive failure and can't get the switchable graphics to work properly. I can't do recovery because the hard drive with the recovery partition is bad and I don't have any recovery disks. All drivers would install fine except the AMD high definition graphics driver from hp. After rebooting windows would freeze on the loading screen and the only solution is to boot into safe mode and uninstall the driver.
After much searching the web and trying various solutions (since friday) I've ran out of ideas. Now I know that a lot of people have had this issue but i can't get it resolved. Right now I've managed to install the intel hd graphics using driverpack solution software but i get a code 43 with the HD 6770m.
I also tried to update the HD6770 with microst update but a get a blank screen with a _ flashing at the top left corner during installation and have to hard reset but then windows would freeze on loading screen.
If you have any ideas guys I would really appreciate the help. Now my only solution would maybe be upgrading to windows 10 and hope that it works with that OS.
Cheers