I have question about RX-V379 + NS-50F + NS-P60 + YST-SW030

AndrewzDesign

Honorable
Nov 22, 2013
3
0
10,510
Hello.

I have question about RX-V379 + NS-50F + NS-P60 + YST-SW030.

When center or surround set to none on the receiver front speakers are playing fine. But when center or surround set to small/large front speakers is playing much quieter.

Is that normal or I can do something with settings?
Receiver is connected to TV via HDMI.
 
Solution
Your receiver came with a microphone that will allow the receiver to set itself up and balance the volume of all the speakers from your listening position. If you don't have the mic then you can do this manually. WIth the test noise each speaker should be set to the same volume from you chair. Then the levels you get when playing the system will be as should the director intended.
Links to the manual and set up guide are here
http://usa.yamaha.com/products/audio-visual/av-receivers-amps/rx/rx-v379_black_u/
Your receiver came with a microphone that will allow the receiver to set itself up and balance the volume of all the speakers from your listening position. If you don't have the mic then you can do this manually. WIth the test noise each speaker should be set to the same volume from you chair. Then the levels you get when playing the system will be as should the director intended.
Links to the manual and set up guide are here
http://usa.yamaha.com/products/audio-visual/av-receivers-amps/rx/rx-v379_black_u/
 
Solution

AndrewzDesign

Honorable
Nov 22, 2013
3
0
10,510


hi, thank you for the answer. i know how to calibrate :) but my question was. is it normal for front speakers to start play louder when center or surround is disabled? or i can do something with options? i want front speakers to play equally loud when center and surround is on (small/large setting). Problem is when center is enabled front speakers play much quieter.