Laptop won't boot after failed install of Windows 10

xXAlecXx

Estimable
Nov 27, 2015
2
0
4,510
0
Now my problem is that, When i open my laptop it shows me this samsung logo and it just stays there, I tried pressing F2 but nothing happened. Is there any solution out there for this? Thanks!
 
Hi,

Please do try these troubleshooting steps that may help.
- Do a hard reset first, remove the battery and AC adapter then press and hold the power button for 20 seconds and see if it would get pass the Samsung logo.
- Next to remove the HDD off the laptop boot it up without it and see if it would get pass that screen because if it does you might have your suspect already but if it will stick get stuck that means it's a motherboard failure.
- Lastly, reset BIOS by removing the CMOS battery for couple of seconds then put it back in and see if the same problem will happen.
 
Thread starter Similar threads Forum Replies Date
hyacinth001 Laptop Tech Support 1
Shootingstar007 Laptop Tech Support 3
paccjas Laptop Tech Support 0
P Laptop Tech Support 0
D Laptop Tech Support 0
C Laptop Tech Support 1
Nohen Laptop Tech Support 4
A Laptop Tech Support 2
K Laptop Tech Support 5
Q Laptop Tech Support 1
L Laptop Tech Support 1
K Laptop Tech Support 1
C Laptop Tech Support 1
J Laptop Tech Support 1
K Laptop Tech Support 2
J Laptop Tech Support 7
B Laptop Tech Support 1
H Laptop Tech Support 4
S Laptop Tech Support 11
R Laptop Tech Support 1

ASK THE COMMUNITY