Lg 60pc1d plazma ?

[steelerfaninkc]

I was givin a lg 60pc1d plazma tv that powered up but wouldn't turn on so I opened it up and replaced several swollen caps and turned the TV on now it blinks three times and goes back to standby. I started testing by unplugging the different boards and it was the same until I unplugged the y sus board on the y sus side from the main power board then it came on and stayed on without picture of course. I then pulled the two y buffer boards and checked each ribbon connector for continuity and had 2 connectors on each buffer board beep I believe whigh means both y buffers are bad. If that's the case am I safe to assume if I order two of the y buffer boards that it will work or could there still be a problem with the y sus board? Is there a decent way to test the y sus board to be certain? Ty in advance ps. I love this site Iots of great knowledge to soak up.

 

[rgd1101]

MERGED QUESTION
Question from steelerfaninkc : "Lg plasma partial black screen"

Hi I was Givin a lg 60pc1d plasma tv because he couldn't get it to come on. So I got it home and opened it up and replaced the only 3 caps that I could find bad. They were on the z sus board. I plugged the set in and it powered on but only the right side worked it looked perfect but the left side was black. I went to bed and when I got up I plugged the set back in and only about 20 inches from top to bottom in the middle of the set looked good from the 20 inches it was black from top to bottom to both edges of screen. I'm hoping the tv isn't ruined and that I can still save it but I haven't found out much info on this topic. Found lots of half black top or bottom but not one side or the other ot just the middle working. Please any help u can give would be much appreciated.

 

[americanaudiophile]

Try
www.shopjimmy.com
They sell replacement boards and are very helpful.