LG Fiesta 2 freezing and restarting

[eapona2]

My LG Fiesta 2 keeps freezing and restarting itself. It was working perfectly fine until i uninstalled 2 games i had on it. Now each time i try restarting it or when it does it itself it freezes upon turning back on and going to the home menu. I also had an SD card that was formatted to it and worked, now it says it needs to format again but when I try to it stops at 20% then closes the settings out and keeps doing so every time I try.

 

[webworkings]

Sounds like you may have something on the device you don't want. Try checking it for viruses, malware, etc. as just removing any app you installed should not cause any problems.

If it refuses to work correctly after checking it, I would suggest you save your personal files (contacts, photos, etc.) to a computer or cloud account and then "Hard Reset" the device.

NOTE: Doing this will clear 'all' the data on your phone, so it is suggested you not choose this option unless you have to, or aren't worried about losing anything on the phone.

Be sure you back up any data you want to keep, to a computer or cloud account, before doing the reset.


To "Hard Reset" the phone...

1. Make sure that the phone is actually powered off.

2. Remove your SD card, if there is one in the device.

3. Press the "Power" and the "Volume Up" buttons, together, until you see the start-up logo on the screen.

4. Once you can see the logo, release the buttons and allow the device to enter the "System Recovery Mode".

5. Next use "Volume Down" button to get to the "wipe data/factory reset" option When in recovery mode the "Volume Up" and "Volume Down" buttons are how to can navigate and highlight what option you need.

6. Once you have selected the "wipe data/factory reset", press the "Power" button to select that option.

7. On the following screen, repeatedly press the "Volume Down" button until the "Yes - delete all user data" option is what is selected.

8. Then press the "Power" button to hard reset the phone.

9. If you took your SD card out in step 2, when the device is up and running again, reinsert the SD card.