My Acer kblgo was goes screen black but power button still work

Try this...

1. Turn the laptop off (not sleep or hibernate but off).
2. Connect an external monitor to the laptop.
3. Turn on the external monitor.
4. Turn on the laptop.

NOTE: You may have to press an "external monitor" button. Could be the f4 button or a button with two monitors on it, for the external monitor to work.

If you can see fine on the external monitor, then your attached display, or the ribbon cable that connects it, are your problem.

If you can't see on the external monitor at all, or the problem occurs on the external monitor as well, then it is probably the graphics card/GPU that is the problem, which may require the motherboard be replaced.
 
Try this...

1. Turn the laptop off (not sleep or hibernate but off).
2. Connect an external monitor to the laptop.
3. Turn on the external monitor.
4. Turn on the laptop.

NOTE: You may have to press an "external monitor" button. Could be the f4 button or a button with two monitors on it, for the external monitor to work.

If you can see fine on the external monitor, then your attached display, or the ribbon cable that connects it, are your problem.

If you can't see on the external monitor at all, or the problem occurs on the external monitor as well, then it is probably the graphics card/GPU that is the problem, which may require the motherboard be replaced.
 
Thread starter Similar threads Forum Replies Date
A Laptop Tech Support 6
MukundGupta Laptop Tech Support 1
A Laptop Tech Support 2
mharte88 Laptop Tech Support 3
B Laptop Tech Support 2
Ap2235 Laptop Tech Support 4
A Laptop Tech Support 3
mavericknathan1 Laptop Tech Support 0
A Laptop Tech Support 0
lahist Laptop Tech Support 0
M Laptop Tech Support 0
IC_Dev Laptop Tech Support 0
R Laptop Tech Support 2
S Laptop Tech Support 0
Hamza ben ali Laptop Tech Support 6
deepath Laptop Tech Support 0
F Laptop Tech Support 2
M Laptop Tech Support 1
L Laptop Tech Support 1
laptops 12308 Laptop Tech Support 1

ASK THE COMMUNITY