My Asus Windows 7 detects no Wi-Fi networks whatsoever, yet phones and other computers do detect and connect to Wi-Fi. I've tr

Solution
You are saying that in your Control Panel there are no listed networks at all? That is rather odd. The program info should still be there, even if the parts went bad or the connection was lost.

If you go to "Start" and in the search box type "networks" no quotes and make sure to include the 's' it should then give you options for "Manage Saved Networks" and "Manage Wireless Networks".
Try this....

1. Go to "Control Panel".

2. Next go to "Network and Internet" and then "Network and Sharing".

3. Now click on "Manage Wireless Networks".

4. On this screen, remove all wireless connections by "right clicking" on it and select "Remove network" from the drop down menu.

5. After doing this, close the open windows and reboot the computer.

6. Once the computer is fully reloaded, scan for the "WiFi networks".

7. Click on the available network that you want to access and select "connect".

8. It takes a moment, but then you will be asked to give a password for your WiFi connection. Type in the password and click the "connect" button.

It should now be connected.

NOTE: If this doesn't work, you may want to reset your modem/router, and then once it is fully loaded again, repeat the above steps.

If this doesn't work, test seeing if your laptop will connect via Ethernet. If so, then your WiFi card may be going. You can either look to replace it/have it replaced, or get an external (plugs in via USB) WiFi card.


Another way to try it is to...

1. Go to "Settings".
2. Click on "Network & Security" and then click on "WiFi".
3. Now click "Manage known networks".
4. Select the WiFi connection you want to remove.
5. Click the "Forget" button.
6. After doing this, close the open windows and reboot the computer.
7. Once the computer is fully reloaded again go to "Settings".
8. Click on "Network & Security" and then click on "WiFi".
9. Now click "Manage known networks".
10. Click "Add a new network" and enter the network name.
11. Using the drop-down menu, select the "network security type".
12. Check the "Connect automatically" option.
13. Now check the "Connect even if the network is not broadcasting" option and click "Save".

Once you have completed these steps, whenever the device is within range of that particular network, it should automatically connect to it.
 

unicyclemann

Prominent
Jan 10, 2018
2
0
510
I really appreciate your response, but none of the above is relevant. My computer has "no connections available" whatsoever anywhere. Steps 3-8 don't exist on this laptop, and in the second option, my computer has no "settings" menu.
 
You are saying that in your Control Panel there are no listed networks at all? That is rather odd. The program info should still be there, even if the parts went bad or the connection was lost.

If you go to "Start" and in the search box type "networks" no quotes and make sure to include the 's' it should then give you options for "Manage Saved Networks" and "Manage Wireless Networks".
 
Solution