If that device has a reset button/hole (not all do) then you can try and reset it that way. However, that has nothing to do with the fact that it won't turn on. Even using a button/hole to reset requires there be power. So that may not be your issue.
Try the following and see if it will turn on.
1. Remove the battery.
2. Press and hold the "Power" button for 20 seconds.
3. Now put the battery back in.
4. Plug it in to charge and allow it to fully charge before turning it on.
If this doesn't help, then test the charger cord to see if it is good. Either try your cord in another device, or try another devices cord on your device.
Should that not be the problem, then check the battery to see if it needs replacing.
NOTE: Yes, I know...