"One moment please..." after rtvpatch

G

Guest

Guest
Archived from groups: alt.video.ptv.replaytv (More info?)

Hi guys,

I've used rtvpatch on my 3030 a few times, and I just got a 5080 with a
bum drive. I took the 80 gig drive I had in my 3030 and formatted it,
then used rtv5040_110.zip from
http://rgb.cc/replaytv/images/replay/50xx/?C=S;O=D to restore to the
drive.

I jumpered it properly, plugged it in, and then powered it on. I get
the initial Replay boot screen that says 'One moment please...'

It's sat there for a while now, about a half hour. When I patched my
3030, it would sit there for a couple minutes, then switch off.
Any tips?
 
G

Guest

Guest
Archived from groups: alt.video.ptv.replaytv (More info?)

Tried that, no luck. I switched hard drives (the first one failed
Maxtor's smart test) with a known good one and restored the 5072 image
and patched it, it now sticks at the "Please wait..." screen. Thoughts?
 
G

Guest

Guest
Archived from groups: alt.video.ptv.replaytv (More info?)

Status change! I changed the drive jumpering from Master to Cable
Select and it booted properly.

Thanks for the tips!
 
G

Guest

Guest
Archived from groups: alt.video.ptv.replaytv (More info?)

On 17 Nov 2004 20:31:14 -0800, "Chairboy" <ben.hallert@gmail.com>
wrote:

>Tried that, no luck. I switched hard drives (the first one failed
>Maxtor's smart test) with a known good one and restored the 5072 image
>and patched it, it now sticks at the "Please wait..." screen. Thoughts?

This happens when the Replay detects some error (such as a bad disk or
software corruption). It would help if the Replay would actually tell
you WHAT error it is rather than just rebooting.

--
37 days until the winter solstice celebration

Mark Lloyd
has a Replay 5xxx
http://go.to/notstupid
http://notstupid.laughingsquid.com

"It is a curious thing that every creed promises a
paradise which will be absolutely uninhabitable for
anyone of civilized taste." -- Evelyn Waugh