Satelite A40 Overheating Issue.Options
Have the SPA40 Model # PSA45-001YM-DU. Has worked flawlessly for years. It has been operated on a sofa or bed and the circulation may have been less than adequate. I now find that after about three minutes of operation, the large fan [Bottom] dramatically increases then the machine shuts down. There is a smaller rear fan that shows minute dust accumultation but close inspection shows no accumulations large enough to block air flow. Images are found at:http/cid-4ad6aabd72471dbb.skydrive.live.com/albums.aspx
I would ask the following:
•Is there a pdf of a service manual for this machine made in the Netherlands
•Is there a troubleshooting sequence to be followed
•The images demonstrate what I beleve to be nearly all of the cooling system... Should more of the machine be dismantled for additional images
•Should parts be required can they be acquired directly from a supplier... This machine is in the U.S.A. now but manufactured in the Netherlands
Have the SPA40 Model # PSA45-001YM-DU. Has worked flawlessly for years. It has been operated on a sofa or bed and the circulation may have been less than adequate. I now find that after about three minutes of operation, the large fan [Bottom] dramatically increases then the machine shuts down. There is a smaller rear fan that shows minute dust accumultation but close inspection shows no accumulations large enough to block air flow. Images are found at:http/cid-4ad6aabd72471dbb.skydrive.live.com/albums.aspx
I would ask the following:
•Is there a pdf of a service manual for this machine made in the Netherlands
•Is there a troubleshooting sequence to be followed
•The images demonstrate what I beleve to be nearly all of the cooling system... Should more of the machine be dismantled for additional images
•Should parts be required can they be acquired directly from a supplier... This machine is in the U.S.A. now but manufactured in the Netherlands