Possible convert wired speaker set up to wireless?

[ianrobbo10]

Hi guys, II have a standard hi-fi set up: Amp with record player attached, and from the amp two wired (exposed copper type not RCA) speakers. My question is, is it possible to make the speakers wireless? I would assume I'd need a Bluetooth kit with the transmitter on the stereo out of the amp, and two receivers - one for each speaker, but as far as I can tell this doesn't exist. And if it does, I imagine it'll be for speakers with RCA inputs.

Any help would be much appreciated!

 

[kanewolf]

Since your speakers require an external amp (or amps) there is no simple way to make them wireless. You would do better to purchase new speakers that were designed to be wireless.

 

[americanaudiophile]

To do that you would need to connect a bluetooth transmitter to the tape record out of the stereo.
You would then need an amplifier with a bluetooth receiver built in. It would be wired to the speakers so you can avoid a the long run but not all wiring.
Check out part-express.com for different options.
It will not sound as good as leaving them wired.

 

[ianrobbo10]

Thanks, I'll keep them wired I think. Just means I have to run wires pretty much round the entire room! Appreciate your help.

 

[fwu5589]

Hi guys, II have a standard hi-fi set up: Amp with record player attached, and from the amp two wired (exposed copper type not RCA) speakers. My question is, is it possible to make the speakers wireless? I would assume I'd need a Bluetooth kit with the transmitter on the stereo out of the amp, and two receivers - one for each speaker, but as far as I can tell this doesn't exist. And if it does, I imagine it'll be for speakers with RCA inputs.

Any help would be much appreciated!

 

[fwu5589]

For wireless (WIFI network only) , not for bluetooth

http/www.sonos.com/en-ca/shop/connectamp.html

and you could use the sonos apps as remote control on your smartphone devices.

The Sonos phone support are very helpful.

PS: I do not work for Sonos..

Cheers