Toshiba 30HF84 service menu

G

Guest

Guest
Archived from groups: alt.tv.tech.hdtv (More info?)

For these who own Toshiba 30HF84 (or 26HF84) and would like to correct
factory settings of their set here is how to access service menu and a list
of parameters with values from factory setting of my set. However it is
important to understand that each TV set comes with its own unique values
due to small differences in each TV.

To access service menu press and hold Volume Down button on the front panel
till volume gets to "0". Then keep holding Volume Down and press and hold
number "9" button till service menu appears on the screen. Left and right
arrow around "Menu" button switch the parameters and up and down arrow
buttons changes the values of the parameters. BEFORE CHANGING ANY VALUE OF
PARAMETERS WRITE ALL 58 ON THE PAPER. Parameter numbers are from 00 to 59
with parameter 01 being just horizontal line on my TV.

00 OSD value 7
01 (horizontal line)
02 H. POSI value 73
03 V. POSI value 1
04 H. SIZE value 34
05 V. SIZE value 29
06 V. LIN value 27
07 V-EHT value 4
08 H-EHT value 3
09 V-BLK P value 31
10 V-BLK S value 0
11 V. CENT value 29
12 V. LIMIT value 0
13 V. CORR value 2
14 V.S. CORR value 30
15 EW PARA value 11
16 TRAPEZIUM value 63
17 COR. TOP value 13
18 COR. BTM value 10
19 S. CORR value 16
20 CORNER value 21
21 C. PARA value 8
22 C. SAW value 8
23 V. SYMM value 128
24 R. BIAS value 64
25 G. BIAS value 124
26 B. BIAS value 74
27 R/G. DRV value 68
28 B/R. DRV value 70
29 R. BIAS (C) value 64
30 G. BIAS (C) value 120
31 B. BIAS (C) value 59
32 R/G. DRV (C) value 64
33 B/R. DRV (C) value 78
34 R. BIAS (W) value 64
35 G. BIAS (W) value 139
36 B. BIAS (W) value 100
37 R/G. DRV (W) value 81
38 B/R. DRV (W) value 60
39 R-Y GAIN value 8
40 R-Y PAHSE value 0
41 G-Y GAIN value 5
42 G-Y PAHSE value 0
43 BRI. CENT value 159
44 BRI. MAX value 250
45 BRI. MIN value 110
46 CONT. CENT value 70
47 CONT. MAX value 127
48 CONT. MIN value 40
49 COL. CENT value 56
50 COL. MAX value 127
51 COL. MIN value 0
52 SUB CONT value 10
53 TINT value 65
54 SHARP. MAX value 55
55 SHARP. MAX value 100
56 SHARP. MIN value 0
57 TILT. CENT value 174
58 TEST STEREO value 0
59 TEST AUDIO value 0
 

gerry

Distinguished
Apr 2, 2004
48
0
18,580
0
Archived from groups: alt.tv.tech.hdtv (More info?)

Thanks.

How do you like your 20HF84 ?

I've been a little put off by the negative posts of some customers.
I suspect calibration would have helped a lot of them.



On Mon, 31 Jan 2005 06:40:57 GMT, "Darek Fisk" <df@propaganda.org>
wrote:

>For these who own Toshiba 30HF84 (or 26HF84) and would like to correct
>factory settings of their set here is how to access service menu and a list
>of parameters with values from factory setting of my set. However it is
>important to understand that each TV set comes with its own unique values
>due to small differences in each TV.
>
>To access service menu press and hold Volume Down button on the front panel
>till volume gets to "0". Then keep holding Volume Down and press and hold
>number "9" button till service menu appears on the screen. Left and right
>arrow around "Menu" button switch the parameters and up and down arrow
>buttons changes the values of the parameters. BEFORE CHANGING ANY VALUE OF
>PARAMETERS WRITE ALL 58 ON THE PAPER. Parameter numbers are from 00 to 59
>with parameter 01 being just horizontal line on my TV.
>
>00 OSD value 7
>01 (horizontal line)
>02 H. POSI value 73
>03 V. POSI value 1
>04 H. SIZE value 34
>05 V. SIZE value 29
>06 V. LIN value 27
>07 V-EHT value 4
>08 H-EHT value 3
>09 V-BLK P value 31
>10 V-BLK S value 0
>11 V. CENT value 29
>12 V. LIMIT value 0
>13 V. CORR value 2
>14 V.S. CORR value 30
>15 EW PARA value 11
>16 TRAPEZIUM value 63
>17 COR. TOP value 13
>18 COR. BTM value 10
>19 S. CORR value 16
>20 CORNER value 21
>21 C. PARA value 8
>22 C. SAW value 8
>23 V. SYMM value 128
>24 R. BIAS value 64
>25 G. BIAS value 124
>26 B. BIAS value 74
>27 R/G. DRV value 68
>28 B/R. DRV value 70
>29 R. BIAS (C) value 64
>30 G. BIAS (C) value 120
>31 B. BIAS (C) value 59
>32 R/G. DRV (C) value 64
>33 B/R. DRV (C) value 78
>34 R. BIAS (W) value 64
>35 G. BIAS (W) value 139
>36 B. BIAS (W) value 100
>37 R/G. DRV (W) value 81
>38 B/R. DRV (W) value 60
>39 R-Y GAIN value 8
>40 R-Y PAHSE value 0
>41 G-Y GAIN value 5
>42 G-Y PAHSE value 0
>43 BRI. CENT value 159
>44 BRI. MAX value 250
>45 BRI. MIN value 110
>46 CONT. CENT value 70
>47 CONT. MAX value 127
>48 CONT. MIN value 40
>49 COL. CENT value 56
>50 COL. MAX value 127
>51 COL. MIN value 0
>52 SUB CONT value 10
>53 TINT value 65
>54 SHARP. MAX value 55
>55 SHARP. MAX value 100
>56 SHARP. MIN value 0
>57 TILT. CENT value 174
>58 TEST STEREO value 0
>59 TEST AUDIO value 0
>
 
G

Guest

Guest
Archived from groups: alt.tv.tech.hdtv (More info?)

You are right. My set looked terrrrible right out of the box. But after the
calibration and very limited one it is quite different story. So it is not
bad TV set for the money you pay.

Darek

"gerry" <gerry_m@spam_this.com> wrote in message
news:6tquv0tgu3t08jaiucbchohcv6jku5v3si@4ax.com...
|
| Thanks.
|
| How do you like your 20HF84 ?
|
| I've been a little put off by the negative posts of some customers.
| I suspect calibration would have helped a lot of them.
|
|
|
| On Mon, 31 Jan 2005 06:40:57 GMT, "Darek Fisk" <df@propaganda.org>
| wrote:
|
| >For these who own Toshiba 30HF84 (or 26HF84) and would like to correct
| >factory settings of their set here is how to access service menu and a
list
| >of parameters with values from factory setting of my set. However it is
| >important to understand that each TV set comes with its own unique values
| >due to small differences in each TV.
| >
| >To access service menu press and hold Volume Down button on the front
panel
| >till volume gets to "0". Then keep holding Volume Down and press and hold
| >number "9" button till service menu appears on the screen. Left and right
| >arrow around "Menu" button switch the parameters and up and down arrow
| >buttons changes the values of the parameters. BEFORE CHANGING ANY VALUE
OF
| >PARAMETERS WRITE ALL 58 ON THE PAPER. Parameter numbers are from 00 to 59
| >with parameter 01 being just horizontal line on my TV.
| >
| >00 OSD value 7
| >01 (horizontal line)
| >02 H. POSI value 73
| >03 V. POSI value 1
| >04 H. SIZE value 34
| >05 V. SIZE value 29
| >06 V. LIN value 27
| >07 V-EHT value 4
| >08 H-EHT value 3
| >09 V-BLK P value 31
| >10 V-BLK S value 0
| >11 V. CENT value 29
| >12 V. LIMIT value 0
| >13 V. CORR value 2
| >14 V.S. CORR value 30
| >15 EW PARA value 11
| >16 TRAPEZIUM value 63
| >17 COR. TOP value 13
| >18 COR. BTM value 10
| >19 S. CORR value 16
| >20 CORNER value 21
| >21 C. PARA value 8
| >22 C. SAW value 8
| >23 V. SYMM value 128
| >24 R. BIAS value 64
| >25 G. BIAS value 124
| >26 B. BIAS value 74
| >27 R/G. DRV value 68
| >28 B/R. DRV value 70
| >29 R. BIAS (C) value 64
| >30 G. BIAS (C) value 120
| >31 B. BIAS (C) value 59
| >32 R/G. DRV (C) value 64
| >33 B/R. DRV (C) value 78
| >34 R. BIAS (W) value 64
| >35 G. BIAS (W) value 139
| >36 B. BIAS (W) value 100
| >37 R/G. DRV (W) value 81
| >38 B/R. DRV (W) value 60
| >39 R-Y GAIN value 8
| >40 R-Y PAHSE value 0
| >41 G-Y GAIN value 5
| >42 G-Y PAHSE value 0
| >43 BRI. CENT value 159
| >44 BRI. MAX value 250
| >45 BRI. MIN value 110
| >46 CONT. CENT value 70
| >47 CONT. MAX value 127
| >48 CONT. MIN value 40
| >49 COL. CENT value 56
| >50 COL. MAX value 127
| >51 COL. MIN value 0
| >52 SUB CONT value 10
| >53 TINT value 65
| >54 SHARP. MAX value 55
| >55 SHARP. MAX value 100
| >56 SHARP. MIN value 0
| >57 TILT. CENT value 174
| >58 TEST STEREO value 0
| >59 TEST AUDIO value 0
| >
|
 

John Malpas

Honorable
Jan 2, 2014
1
0
10,510
0



this service menu adjustment worked for me!!!! I have a 30HF84 and was experiencing SEVERE overscan issues while in HDMI mode and playing xbox 360 and xbox one. couldnt see about 1.5 inches of the screen all the way around. i used this post to enter the "service menu" as advised and adjusted the settings as i would any normal computer monitor to get the overscan corrected and all the screen back viewable again. i cant believe this worked!! GOOD POST GUYS!! THANK YOU!! ive been using this tv for years now and purchased it second hand off craigslist. Easy Peasy!! **** WRITE ALL YOUR VALUES ON A PIECE OF PAPER FIRST AS ADVISED!! ****
 
Thread starter Similar threads Forum Replies Date
C Streaming Video & TVs 4
B Streaming Video & TVs 3
Z Streaming Video & TVs 0
camilleegg Streaming Video & TVs 1
K Streaming Video & TVs 2
A Streaming Video & TVs 3
P Streaming Video & TVs 2
G Streaming Video & TVs 0
rwcass75 Streaming Video & TVs 5
S Streaming Video & TVs 1
K Streaming Video & TVs 1
L Streaming Video & TVs 1
4freedomssake Streaming Video & TVs 4
MinnieLee712 Streaming Video & TVs 1
L Streaming Video & TVs 3
Y Streaming Video & TVs 1
R Streaming Video & TVs 2
T Streaming Video & TVs 4
D Streaming Video & TVs 1
S Streaming Video & TVs 1

ASK THE COMMUNITY